If you purchase this report now and we update it in next 100 days, get it free!
Market Insights The global landscape lighting market is increasingly shaped by electrical safety, environmental protection and light-pollution requirements alongside aesthetic considerations. IEC 60598-2-1:2025 establishes particular safety requirements for fixed general-purpose luminaires, covering relevant construction, electrical clearances, endurance and thermal testing. The IEC 60529 ingress protection framework determines the level of protection required for different outdoor environments. IP65 is commonly specified for general garden and pathway applications, while IP66 and IP67 are relevant for fixtures exposed to stronger water jets, standing water or more demanding installation conditions. In North America, UL 1598 and UL 8750 address luminaire and LED-equipment safety, while ANSI/UL 1838 and CSA C22.2 No. 250.7 apply to low-voltage landscape lighting systems. Environmental and photobiological requirements further influence product design. Dark Sky ordinances in jurisdictions such as Ketchum, Sun Valley and Blaine County promote downward-directed, fully shielded lighting and correlated colour temperatures (CCT) of 3000K or lower, with some environmentally sensitive locations applying 2700K limits. These requirements influence fixture optics, shielding and colour-temperature selection. IEC 62471 provides the framework for assessing photobiological risks from optical radiation, including potential blue-light hazards from high-output LED spotlights and floodlights. Regional requirements add further compliance considerations: Australia and New Zealand apply the AS/NZS 60598 series and RCM requirements; India follows the BIS IS 10322 series, including the stated 2026 revision transition; and China applies GB 7000.207-2008 for portable garden luminaires.
Competition is shaped by three capabilities: certification coverage, environmental durability and optical engineering. Suppliers need to demonstrate compliance with the relevant electrical, LED and system-level requirements for their target markets. An IP rating alone does not establish compliance with luminaire safety standards, while a luminaire listing does not automatically establish certification of a complete low-voltage landscape system. This creates an advantage for manufacturers offering products with broader certification coverage. Material selection and thermal management distinguish suppliers serving demanding outdoor environments. Brass, copper, corrosion-resistant finishes, silicone gaskets and stainless-steel hardware can support applications exposed to moisture, UV radiation and coastal conditions. Optical design is another differentiator, particularly in markets enforcing Dark Sky requirements. Manufacturers able to offer controlled beam distribution, effective shielding and compliant CCT options are better positioned in residential, hospitality and public-realm projects.
What's Inside a Bonafide Research`s industry report?
A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.
Market DynamicsDriver: Dark Sky requirements and low-voltage safety compliance
Growing attention to light pollution, outdoor safety and energy efficiency is increasing demand for landscape lighting products that meet local installation and environmental requirements. Dark Sky provisions influence fixture shielding and CCT, while NEC Article 411 establishes requirements for low-voltage lighting systems, including voltage limits of 30 volts AC or 60 volts DC. System-level listing under ANSI/UL 1838 is relevant to compliant low-voltage installations. Alongside these regulatory factors, demand is supported by outdoor aesthetic improvements, residential landscaping and the adoption of smart lighting systems. The source draft also cites an estimated USD 1.1 billion value for the low-voltage outdoor landscape lighting segment in 2024.
Challenge: Thermal performance and light-trespass documentation
Sealed outdoor fixtures face a thermal-management challenge because protective housings can restrict heat dissipation from LED components. Spike-mounted fixtures installed in soil may experience thermal derating, affecting sustained lumen output and product life. Manufacturers must therefore validate thermal performance under realistic operating conditions. Another challenge is demonstrating compliance with local light-trespass requirements. Beam-angle specifications alone may not establish compliance with full-cutoff rules; suppliers may need to provide photometric distribution and shielding evidence. Different national certification timelines can also increase product-testing and documentation costs for manufacturers serving multiple markets.
Trend: Smart low-voltage systems and integrated controls
Landscape lighting is moving towards connected low-voltage systems that combine app-based control, programmable zones, scheduling and motion sensors. These features allow homeowners and facility managers to manage lighting scenes and integrate illumination with security functions. Product development is also incorporating solar-assisted designs, recyclable materials, modular fixtures and adaptive controls. As connectivity increases, manufacturers must consider cybersecurity requirements applicable to connected controllers, including relevant provisions under the UK PSTI framework and the EU Cyber Resilience Act.
Make this report your own
Have queries/questions regarding a report
Take advantage of intelligence tailored to your business objective
Reecha Roy
Research Analyst
Segmentation AnalysisBy Product Type
• Path lights provide low-level illumination for walkways and garden paths, with weather protection and controlled light distribution influencing product selection. Bollard lights illuminate pathway edges and public spaces, where structural durability and impact resistance are important.
• Spotlights provide directional illumination for trees and landscape features, making beam control and glare reduction key design considerations.
• Floodlights serve wider-area and security applications, requiring suitable ingress protection and glare control.
• In-ground lights are recessed into surfaces for feature illumination and wall washing, with higher protection against moisture and physical loading.
• Step lights support stairways and deck circulation through low-glare illumination, while deck lights are designed for surface and railing installation, where corrosion resistance and weather protection influence performance.
By Technology
• LED is the dominant technology because of its energy efficiency, long operating life and dimming capabilities. It also supports the warm-colour and controllable-output requirements increasingly specified in outdoor lighting.
• Solar LED combines photovoltaic modules, batteries and LED sources, making it suitable for locations where grid connections are difficult or costly. The source draft identifies IEC TS 62257-9-8:2025 as a relevant quality and durability framework for qualifying off-grid solar products within its stated power and voltage limits.
• Halogen remains in some replacement and lower-cost installations, although higher energy consumption and shorter operating life limit its competitiveness.
• Other technologies, including fibre-optic and induction sources, serve specialised applications where light delivery or electrical-component placement differs from conventional fixtures.
By Power Source
• Grid-powered systems remain important for installations requiring consistent illumination and extensive fixture networks.
• Low-voltage configurations use transformers and must meet applicable installation and system-listing requirements.
• Solar-powered fixtures are suitable for remote gardens and locations where cabling and trenching costs are high, with product performance depending on photovoltaic capacity, battery storage and operating conditions.
• Battery-powered fixtures serve portable and temporary applications, where battery capacity, enclosure protection and operating temperature influence product selection.
Don't pay for what you don't need. Save 30%
Customise your report by selecting specific countries or regions
By Application
• Residential gardens use landscape lighting for aesthetics, pathways and property security. Parks and public landscapes require controlled illumination that balances visibility with environmental and light-pollution considerations.
• Commercial landscapes, including office and retail campuses, prioritise durability, maintenance costs and consistent illumination.
• Hospitality and resorts use decorative and functional lighting to enhance guest experience, with finish quality, colour control and smart integration influencing procurement.
• Roads and pathways include pedestrian-scale path and bollard lighting, with relevant local outdoor-lighting standards guiding illumination requirements.
By End User
• Residential users represent household purchases for gardens, pathways and outdoor living spaces. Commercial users, including developers and facility managers, prioritise product durability, maintenance and applicable safety listings.
• Government and municipal buyers procure lighting for parks and public spaces, with environmental ordinances and public-procurement requirements influencing approved products.
• Hospitality operators focus on appearance, guest experience and integrated controls. Institutional users, including schools and hospitals, prioritise reliable illumination, electrical safety and compliance with applicable installation requirements.
Regional Analysis • North America is characterised by UL 1598 and UL 8750 listings, ANSI/UL 1838 and CSA C22.2 No. 250.7 for low-voltage systems, and NEC Article 411 installation requirements. Dark Sky ordinances also influence shielding and CCT specifications.
• Europe follows the applicable EN/IEC 60598 luminaire safety framework, CE-marking requirements and photobiological safety provisions under EN 62471. Ground-recessed fixtures are also subject to relevant particular requirements, including EN 60598-2-13. Municipal lighting policies influence product specifications in locations with light-pollution controls.
• Asia-Pacific includes important manufacturing and consumption markets with distinct national requirements. China applies GB 7000.207-2008 for portable garden luminaires, while India follows the BIS IS 10322 series. Australia and New Zealand apply relevant AS/NZS 60598 standards, RCM requirements and AS/NZS 3000 installation provisions, including applicable RCD protection.
• The Gulf and broader Middle East apply national electrical conformity frameworks, including SASO and ESMA in relevant markets. Hospitality, resort and public-realm developments create demand for durable outdoor fixtures, with ingress protection, finish quality and controlled illumination influencing specifications.
• South America applies national electrical conformity requirements, including INMETRO in Brazil. Product selection is influenced by electrical safety, outdoor durability and the technical requirements of residential and commercial landscape installations.
Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031
Aspects covered in this report
• Global Landscape Lighting Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation
One individual can access, store, display, or archive the report in Excel format but cannot print, copy, or share it. Use is confidential and internal only. License information
One individual can access, store, display, or archive the report in PDF format but cannot print, copy, or share it. Use is confidential and internal only. License information
Up to 10 employees in one region can store, display, duplicate, and archive the report for internal use. Use is confidential and printable. License information
All employees globally can access, print, copy, and cite data externally (with attribution to Bonafide Research). License information