If you purchase this report now and we update it in next 100 days, get it free!
Market Insights Infrared LED technology operates at the intersection of semiconductor engineering, optical safety and application-specific performance. Unlike conventional visible-light components, infrared emitters require careful assessment of exposure conditions because their radiation cannot be readily detected by the human eye. IEC 62471-7:2023 establishes optical radiation exposure limits across 200 nm to 3,000 nm, including infrared eye hazards from 780 nm to 3,000 nm and thermal skin hazards from 380 nm to 3,000 nm. The standard evaluates infrared eye hazards using irradiance rather than radiance. A quantitative assessment of an infrared LED ring at 0.1 metres recorded irradiance of 349 W/m² against the Exempt Group limit of 100 W/m², indicating potential exposure risks at close distances. Therefore, an emitter suitable for a surveillance illuminator operating at ten metres may receive a higher risk classification when used in a close-proximity biometric sensor or medical device. Beyond photobiological safety, module-level and automotive qualification requirements determine component suitability. IEC 62031:2026, the third edition of the LED module safety standard, includes a dedicated provision for infrared eye hazards from 780 nm to 3,000 nm, alongside ultraviolet and blue-light hazards. These requirements complement the photobiological assessment under IEC 62471. For automotive applications, AEC-Q102 establishes failure-mechanism-based stress-test requirements for discrete optoelectronic semiconductors, including visible and infrared LEDs, lasers, photodiodes and phototransistors. Automotive-qualified infrared emitters such as Vishay series operate across -40°C to +125°C with thermal resistance ranging from 5 K/W to 9 K/W, while the ams OSRAM OSLON Piccolo is rated for -40°C to +105°C and exceeds AEC-Q102 requirements. Qualification involves temperature cycling, humidity resistance and electrostatic-discharge testing, including thresholds such as 8 kV under ANSI/ESDA/JEDEC JS-001 (HBM).
Manufacturing processes and regional regulations introduce further compliance considerations. China's GB/T 20145-2006, equivalent to IEC 62471, covers photobiological safety for lamps and lamp systems, including LEDs, across 200 nm to 3,000 nm, excluding lasers. It is referenced in Chinese CCC and CQC certification alongside GB 7000.1. In Europe, RoHS Directive 2011/65/EU restricts lead in high-melting-temperature solders, while exemption 7(a)-VI provides an allowance for specialty lamps, including infrared, under applicable conditions. JEDEC J-STD-020F defines moisture sensitivity classifications for semiconductor components. MSL 1 devices have unlimited floor life at ≤30°C and 85% relative humidity, whereas MSL 3 components require reflow within a specified period after opening the moisture barrier bag or baking before use. These classifications determine handling and assembly requirements rather than product quality. Supplier positioning in the infrared LED industry varies according to the applications they serve, the qualification requirements they meet and the technical capabilities of their product portfolios. Automotive, surveillance and medical applications demand different combinations of optical performance, reliability and compliance documentation. For suppliers targeting safety-sensitive applications, photobiological-safety documentation is an important qualification factor. An emitter evaluated for surveillance at ten metres may receive an Exempt or Risk Group 0 classification, while the same component used in a close-proximity biometric or medical application may be classified as Risk Group 1 or higher. Suppliers must provide radiometric data and distance-specific irradiance calculations to support the relevant IEC 62471-7:2023 assessment. Components without appropriate application-specific documentation may be unsuitable for customers operating under strict compliance requirements.
What's Inside a Bonafide Research`s industry report?
A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.
The automotive segment creates a separate competitive environment because of its demanding reliability and qualification requirements. AEC-Q102 testing covers discrete optoelectronic semiconductors used in exterior and interior vehicle systems. Temperature capability is a key differentiator: emitters rated for -40°C to +125°C, with thermal resistance between 5 K/W and 9 K/W, can support demanding exterior and under-hood environments, while products rated to +105°C are suited to less demanding thermal conditions, including in-cabin sensing. Corrosion resistance testing also contributes to supplier qualification, with some automotive infrared emitters specifying a resistance level such as 3B alongside AEC-Q102 and ESD ratings. Product differentiation is also evident in wavelength selection and package engineering. The 850 nm wavelength is widely used in surveillance and CCTV because camera sensitivity is generally higher, supporting brighter images and improved long-distance performance. However, it produces a faint red glow. The 940 nm wavelength offers reduced visible emission but can result in up to 40% lower camera sensitivity and up to 50% less range in some security cameras. This creates a trade-off between image quality and concealment. Package capabilities influence radiant power density and thermal management. Through-hole formats such as TO-18 metal can and 5 mm radial packages serve legacy and low-cost applications. Surface-mount packages, including PLCC-2 and 3528, support volume surveillance and consumer applications. Chip-on-board formats integrate multiple infrared dies to deliver higher radiant power for safety and security camera systems. Suppliers must balance optical output, package design and thermal performance to meet specific application requirements.
Market DynamicsDriver: Automotive sensing mandates and photobiological-safety classification converting the emitter into a qualified component
• The automotive sensing mandates and the photobiological-safety classification have converted infrared LEDs from a surveillance-only component into a qualified-component market whose specification is set by the vehicle safety function and the human-exposure assessment rather than by the emitter's radiant power alone.
• AEC-Q102 is the de facto automotive qualification for discrete optoelectronic semiconductors, and its scope explicitly covers infrared LEDs alongside visible LEDs, lasers, photodiodes, and phototransistors, which means the qualification is not a generic quality certificate but a failure-mechanism-based stress-test regime that the automotive supply chain requires from every emitter. The qualification's temperature range of -40°C to +125°C for exterior-capable parts and -40°C to +105°C for interior parts sets the thermal envelope that the emitter must survive, and the corrosion resistance and ESD testing add failure modes that the consumer-grade qualification does not cover.
• The photobiological-safety classification reinforces the qualification burden because IEC 62471-7:2023 requires the emitter's hazard to be assessed at the intended exposure distance, and an infrared emitter that is Exempt Group at a surveillance distance may be Risk Group 1 or higher at a close-proximity biometric distance, which means the same component can have different compliance outcomes depending on the application.
Challenge: Application-dependent photobiological classification and the wavelength trade-off
• The principal constraint on infrared LED market access is that the photobiological-safety classification is application-dependent, and the same emitter can require different risk-group documentation depending on the exposure scenario, which fragments the product's addressable market and multiplies the compliance files.
• IEC 62471-7:2023 defines the infrared hazard for the eye from 780 nm to 3,000 nm in terms of irradiance rather than radiance, and a ring-shaped infrared emitter at 0.1 metres was found to produce 349 W/m² against the Exempt Group limit of 100 W/m², indicating a potential hazard at close distances even where the visible-spectrum configurations in the same assembly were compliant. This means a supplier cannot simply declare an emitter "IEC 62471 compliant" without specifying the exposure distance and the intended application, and a component marketed for surveillance may require a different risk-group file when designed into a biometric sensor or a medical device.
• The wavelength trade-off compounds the constraint because 850 nm delivers the camera sensitivity that surveillance requires but emits a faint red glow, while 940 nm reduces the visible glow at the cost of up to 40% lower camera sensitivity and 50% less range in some systems, which means the emitter selection is a system-level decision that the component supplier cannot optimise unilaterally.
Make this report your own
Have queries/questions regarding a report
Take advantage of intelligence tailored to your business objective
Reecha Roy
Research Analyst
Trend: Multi-junction and stacked-wavelength integration shifting the value from the discrete emitter to the spectral package
• Infrared LEDs are migrating from single-wavelength discrete emitters toward multi-junction and stacked-wavelength packages that emit two or more distinct infrared bands from a single package, and the product evidence shows that the competitive frontier is the spectral integration rather than the discrete die.
• Multi-junction and stacked-wavelength IR LEDs are expected to capture 10% to 15% of the premium segment by 2035, and the medical and biometric applications require multi-wavelength emitters with high stability over varying skin perfusion and ambient light conditions, specifications that few standard-grade products meet.
• The wavelength portfolio is expanding beyond the 850 nm and 940 nm workhorses, with 920 nm introduced for in-cabin sensing applications and custom wavelength centres such as 730 nm, 760 nm, and 810 nm required for precision agriculture and vegetation-index sensing.
• The integration trend raises the value of the spectral packaging and the application-specific calibration relative to the discrete emitter, because a multi-wavelength package that maintains its wavelength precision across temperature and drive current is a different product from a single-wavelength die with a datasheet peak wavelength.
Segmentation AnalysisBy Wavelength
• The below 850 nm band includes the visible-adjacent and short-wavelength infrared emitters used in biometric sensing, medical photobiomodulation, and some machine-vision applications, and the photobiological-safety assessment in this band must account for the transition from retinal thermal hazard to infrared eye hazard at 780 nm, with IEC 62471-7:2023 covering the 780 nm to 3,000 nm range for the infrared eye hazard.
• The 850 nm to 940 nm band is the volume core of the infrared LED market because 850 nm delivers the highest camera sensitivity for surveillance and CCTV while 940 nm reduces the visible red glow for covert and consumer-facing applications, and the trade-off between the two is a system-level decision in which 940 nm can reduce performance by up to 40% compared with 850 nm and cut range by 50% in some security cameras.
• The above 940 nm band serves specialty applications including some gas sensing and medical sensing, and the wavelength choice is constrained by the detector's responsivity and the application's spectral requirements rather than by the emitter's efficiency alone.
By Package Type
• Through-hole packages, including TO-18 metal can and 5 mm radial formats, serve low-cost, legacy, and high-reliability applications where the hermetic seal and the through-hole mounting are preferred, and the TO-18 metal can provides a hermetically sealed environment for applications where moisture ingress is a concern.
• Surface-mounted packages, including PLCC-2, 3528, and 5050 formats, constitute the volume package category for surveillance, consumer, and automotive applications, and the moisture sensitivity classification under JEDEC J-STD-020F determines the floor life and the reflow window, with MSL 1 providing unlimited floor life at ≤30°C/85% RH and MSL 3 requiring a defined window or a bake before use.
• Chip-on-board packages accommodate multiple infrared dies on a single substrate to maximise radiant power density, and they are the package of choice for safety and security camera applications where the highest output is required, with the thermal path and the die-attach material determining the achievable power density.
• Other packages, including chip-scale and custom substrates, serve application-specific requirements where the standard formats do not meet the optical or thermal constraints.
Don't pay for what you don't need. Save 30%
Customise your report by selecting specific countries or regions
By Power Rating
• Low-power infrared LEDs serve indicator, sensing, and short-range consumer applications where the radiant power requirement is modest and the thermal design is simple, and the photobiological-safety classification is typically Exempt or Risk Group 0 because the irradiance at the intended distance is below the hazard threshold.
• Mid-power infrared LEDs constitute the volume category for surveillance, machine vision, and consumer sensing, and the thermal resistance and the package's ability to dissipate the heat determine whether the emitter can sustain its radiant output over the operating temperature range, with thermal resistance values from 5 K/W to 9 K/W for automotive-qualified parts and as low as 2.8 K/W for high-power compact emitters.
• High-power infrared LEDs serve long-range surveillance, automotive night vision, and 3D sensing applications where the radiant power requirement exceeds what the mid-power category can deliver, and the thermal management and the die-attach technology become the binding constraints, with wall-plug efficiency benchmarks reaching 72% at 850 nm in laboratory prototypes and production parts achieving 35% higher WPE than prior generations.
By Application
• Consumer electronics use infrared LEDs for proximity sensing, biometric identification, and remote controls, and the photobiological-safety classification must account for the close-proximity exposure scenario, with the emitter required to be Exempt or Risk Group 0 at the intended distance.
• Automotive applications use infrared LEDs for driver monitoring, in-cabin sensing, and night vision, and the AEC-Q102 qualification and the -40°C to +125°C temperature range are the gating requirements, with the automotive segment projected to grow its share of consumption alongside machine vision.
• Security and surveillance is the largest application segment for infrared LEDs, and the 850 nm versus 940 nm trade-off between camera sensitivity and visible red glow is the defining specification decision, with 850 nm delivering the brighter image and longer range that most security cameras require.
• Healthcare applications use infrared LEDs for photobiomodulation, pulse oximetry, and non-invasive sensing, and the multi-wavelength stability and the biocompatibility documentation are the differentiating requirements, with the healthcare segment expected to grow at 12% to 15% annually through 2035.
• Industrial sensing uses infrared LEDs for gas detection, moisture measurement, and machine vision, and the wavelength selection is matched to the material's absorption band, with the NDIR gas sensor application requiring a peak emission wavelength in the carbon dioxide absorption band.
• Communication applications use infrared LEDs for short-range data links and optical wireless, and the switching speed and the spectral width are the performance requirements that distinguish the communication segment from the illumination segments.
By End-user
• Consumer electronics manufacturers are the volume end-user segment, and the procurement is driven by the photobiological-safety classification at the intended exposure distance and the MSL classification that determines the assembly process.
• Automotive manufacturers are the most qualification-intensive end-user segment because AEC-Q102 and the extended temperature range are conditions of design-in, and the qualification timeline for a new emitter extends beyond the consumer equivalent.
• Industrial equipment manufacturers use infrared LEDs in sensing, machine vision, and gas detection, and the wavelength precision and the thermal stability are the selection criteria, with custom wavelength centres required for specific absorption bands.
• Healthcare equipment manufacturers require multi-wavelength stability, biocompatibility documentation, and lifetime ratings exceeding 50,000 hours, and the procurement is shaped by the medical-device qualification regime rather than by the general lighting standards.
• Defence and aerospace end-users use infrared LEDs for night-vision-compatible illumination and sensing, and the MIL-STD and NVIS compatibility requirements apply alongside the IEC 62471 photobiological-safety assessment.
Regional Analysis • Europe operates under IEC 62471-7:2023 for photobiological safety, with the infrared hazard for the eye assessed from 780 nm to 3,000 nm and the thermal skin hazard from 380 nm to 3,000 nm, alongside the RoHS Directive 2011/65/EU with exemption 7(a)-VI for specialty lamps including infrared, and the EMC Directive 2014/30/EU where the emitter operates with a switching driver. AEC-Q102 is the de facto automotive qualification across the European supply chain, and the qualification's -40°C to +125°C range and the ESD and corrosion testing are the conditions of design-in for exterior and interior automotive applications.
• North America operates under UL 8750 for LED equipment used in lighting products and FCC Part 15 for radiated-emission control when the LED operates with a switching driver, and the UL 62471 assessment is the photobiological-safety route for the North American market, with the automotive AEC-Q102 qualification applying to the vehicle segment. China operates under GB/T 20145-2006, equivalent to IEC 62471, for the photobiological safety of lamps and lamp systems including LEDs across the 200 nm to 3,000 nm range, and GB 7000.1 for the general safety of luminaires, with the CCC and CQC certification requiring the photobiological-hazard classification declaration or test report, and with China's RoHS equivalent enforced alongside the GB standards.
• The Japan J-Moss and China RoHS environmental packaging directives require material-declaration documentation for each product variant, and the JEDEC J-STD-020F moisture-sensitivity classification is the global packaging standard that determines the floor life and reflow window.
• India's BIS framework applies to the electrical portion of the emitter and the luminaire into which it is integrated, with the IS 10322 series providing the luminaire safety requirements and the IS 302 series providing the electrical safety requirements for the component.
• South Korea requires KC certification under the Electrical Appliances Safety Control Act for the electrical portion of the product, and the National Radio Research Agency's conformity assessment applies where the emitter is integrated into a device with a communication function. Brazil's INMETRO framework applies to the luminaire and the electrical component, with the Portaria 144/2015 and Portaria 20/2017 requirements governing the certification route.
Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031
Aspects covered in this report
• Global Infrared LED Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation
One individual can access, store, display, or archive the report in Excel format but cannot print, copy, or share it. Use is confidential and internal only. License information
One individual can access, store, display, or archive the report in PDF format but cannot print, copy, or share it. Use is confidential and internal only. License information
Up to 10 employees in one region can store, display, duplicate, and archive the report for internal use. Use is confidential and printable. License information
All employees globally can access, print, copy, and cite data externally (with attribution to Bonafide Research). License information