If you purchase this report now and we update it in next 100 days, get it free!
Market Insights The global security lighting market is shaped by a layered compliance framework that determines whether a fixture can be specified for building perimeters, critical-infrastructure sites, and residential applications. In North America, UL 1598 and UL 8750 establish the baseline safety requirements for luminaires and LED equipment. In Europe, IEC 60598-1 covers general luminaire safety, while EN 60598-2-5 addresses floodlight-specific requirements. CE-marked floodlights also require photobiological safety evidence under EN 62471:2008. Environmental protection is another key specification factor, with IP65 commonly required for exterior installations and IP66 preferred for wet, coastal, and high-exposure environments. Life-safety and energy codes further influence product design and installation. NFPA 70 (NEC) requires egress lighting to be connected to an emergency electrical system, while NFPA 101 specifies a minimum illumination level of one foot-candle at floor level along means of egress. At the same time, the International Green Construction Code limits continuously illuminated building security and emergency egress areas to 0.1 W/ft², with additional lighting permitted when controlled by automatic devices. These requirements encourage manufacturers to integrate motion sensors, photocells, and dimming capabilities to balance security visibility with energy consumption. Two additional compliance areas are influencing product development. First, EN 62471:2008 requires photobiological risk assessment of LED light sources, particularly high-output fixtures that may present blue-light or infrared exposure hazards. Second, the UK's Product Security and Telecommunications Infrastructure (PSTI) Act 2022, effective from 29 April 2024, introduces cybersecurity requirements for connectable products, including the prohibition of universal default passwords, vulnerability-disclosure policies, and defined security-support periods. Dark Sky requirements also influence product specifications in regulated jurisdictions, where downward-facing, fully shielded fixtures and correlated colour temperatures (CCT) of 3000K or below are commonly required to limit light pollution.
Competition in the global security lighting market is increasingly determined by certification coverage, integrated control capabilities, environmental compliance, and connected-product security rather than illumination performance alone. The breadth of certification remains a key entry barrier, as North American and European standards address different safety requirements. For example, UL 1598 and UL 8750 establish electrical and LED-equipment safety credentials but do not replace the European floodlight-specific requirements under EN 60598-2-5 or photobiological assessment under EN 62471. Suppliers targeting multiple regions must therefore maintain separate certification portfolios to access regulated markets. Control integration is another differentiating factor, particularly in commercial and critical-infrastructure applications. Energy-code requirements for automatic lighting control have increased demand for luminaires with integral passive infrared (PIR) motion sensors, photocells, and dimmable LED drivers. Interoperability also influences supplier competitiveness. IEC 60669-2-1 covers electronic switches, including relevant motion-sensing devices, while ANSI C136.41 standardises the interface between luminaires and external locking-type photocontrols. Seven-pin receptacles and Zhaga-compatible interfaces allow manufacturers to support third-party control modules and reduce dependence on proprietary systems. Environmental compliance creates a further competitive distinction in municipal and residential projects. Suppliers offering fully shielded, downward-facing fixtures with CCT ratings of 3000K or below are better positioned to serve jurisdictions enforcing Dark Sky requirements. Products that cannot demonstrate compliance with local light-pollution ordinances may face restrictions during planning and specification approvals. Cybersecurity has emerged as an additional competitive consideration for connected security lighting. Manufacturers supplying Wi-Fi- or Bluetooth-enabled products in the UK must meet the applicable PSTI requirements and provide a statement of compliance covering security provisions and the defined support period. Consequently, suppliers with documented cybersecurity processes, longer support commitments, and compliant connected-product architectures have an advantage in regulated retail and commercial channels.
What's Inside a Bonafide Research`s industry report?
A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.
Market DynamicsDriver: Dark Sky ordinances and the HID phase-out converting the installed base into a dated replacement pool
• Dark Sky ordinances and the European phase-out of high-intensity discharge and halogen lamps have converted security lighting from a condition-based replacement category into a compliance-gated procurement pool whose timing is set by regulatory deadlines rather than by lamp failure.
• Municipal ordinances in jurisdictions including Brisbane, Amador County, Ventura County, and Manzanita require security lighting to be downward facing, fully shielded, and 3000K or less, with full-cutoff construction that emits no light above the horizontal plane, which means an existing unshielded or high-CCT security fixture cannot be replaced with a like-for-like product without violating the ordinance.
• The European phase-out adds a dated supply constraint: the EU Regulation 2022/278 and the Ecodesign framework remove many high-intensity discharge lamps, including metal halide, from the market, with a defined pathway to remove metal halide and high-pressure sodium lamps by 2030, and the import cut-off for most incandescent and halogen lamps has already passed.
• The consequence for a facility manager or a homeowner is that a failed HID or halogen security light cannot be replaced with the same technology, and the replacement decision is a compliance decision at the point of failure rather than a planned upgrade.
Challenge: Photobiological risk-group documentation and the connectable-product cybersecurity burden
• The principal constraint on security lighting market access is that the photobiological-safety classification and the cybersecurity obligations are application-specific and not self-declared, and the evidence that a fixture is electrically safe is not the evidence that it is safe to the eye or compliant with the connected-product regime.
• EN 62471 requires the risk-group assessment for the lamp and lamp system, and a high-output LED security floodlight that is Group 0 exempt at a long mounting distance may be a higher risk group when evaluated for a close-proximity installation such as a wall-mounted porch light, which means the same product can require different documentation depending on the application.
• The cybersecurity burden compounds the constraint because the UK PSTI regime applies to any connectable security lighting product sold in Great Britain, and the manufacturer must publish a statement of compliance that defines the support period and the vulnerability-reporting contact, with the three core requirements drawn from ETSI EN 303 645.
• The EU Cyber Resilience Act adds a parallel obligation for the European market, and the Matter, Zigbee, and Thread protocols each carry their own security expectations, which means a single connected security light can require four separate security files for the UK, the EU, and the protocol ecosystems.
Trend: Sensor-integrated and network-controlled security lighting shifting the value from the luminaire to the control and data layer
• Security lighting is migrating from manually switched or photocell-only fixtures toward sensor-integrated and network-controlled systems that combine motion detection, dimming, and remote monitoring, and the product evidence shows that the competitive frontier is the control architecture and the data layer rather than the luminaire's raw output.
• The IGCC's 0.1 W/ft² continuous-lighting limit and the requirement that additional security lighting be controlled by an automatic device have made the integral sensor a code-compliance component rather than a convenience feature, and products with integral passive infrared and photocell sensors controlling 0–10 VDC drivers are the specification default for commercial and critical-infrastructure installations.
• The network-controlled segment adds a further layer because the luminaire becomes a node in the building or campus security system, and the UK PSTI and EU Cyber Resilience Act obligations attach to the network interface rather than to the light engine, which raises the value of the cybersecurity and interoperability credentials relative to the luminaire's efficacy. The competitive frontier is therefore the sensor's detection performance, the control protocol's interoperability, and the security statement's support period, rather than the fixture's lumen package.
Make this report your own
Have queries/questions regarding a report
Take advantage of intelligence tailored to your business objective
Reecha Roy
Research Analyst
Segmentation AnalysisBy Product Type
• Floodlights constitute the volume backbone of the security lighting market because they provide the high-output area illumination required for building perimeters, yards, and parking areas, and their certification follows UL 1598 and UL 8750 in North America and EN 60598-2-5 with EN 62471 in Europe, with IP66 specified for wet and coastal locations.
• Motion-sensor lights are the fastest-growing product type because the IGCC's automatic-control requirement and the broader energy-code pressure have made the integral sensor a specification default, and the sensor must satisfy IEC 60669-2-1 alongside the luminaire's safety listing, with the detection range and the time-delay adjustability determining whether the product can satisfy the code's automatic-off requirement.
• Wall-mounted security lights serve residential and light-commercial applications where a compact fixture is mounted on the building envelope, and their certification follows the same general luminaire standards with the additional consideration of the photobiological risk group at the close mounting distance.
• Perimeter lights are the specification for critical-infrastructure fence lines and industrial boundaries, and the illuminance requirement is set by the security standard rather than by the general lighting code, with DOE and NRC guidance specifying 0.5 foot-candles at the outer edge of the clear zone where the perimeter is protected by an intrusion detection system and assessed by CCTV, and 2.2 lux (0.2 foot-candles) as the minimum service lighting intensity for certain protected facilities.
• Integrated camera lights combine the luminaire and the camera in a single assembly, and their certification must cover the camera's imaging performance alongside the lighting safety and the cybersecurity obligations, which makes this the most certification-intensive product type in the segment.
By Technology
• LED has become the default technology in security lighting because the phase-out of high-intensity discharge and halogen lamps removes the incumbent sources from the market, and because the LED's instant-on behaviour and dimmability are prerequisites for the sensor-integrated control that the energy code requires.
• HID lighting remains in the installed base and in some high-mast perimeter applications, but the EU phase-out pathway to remove metal halide and high-pressure sodium lamps by 2030 and the mercury-content restrictions have narrowed the forward procurement pathway to the point where a new HID security installation cannot be justified in a regulated market.
• Halogen lighting is effectively removed from the new-installation market in Europe and is confined to legacy residential fixtures and replacement lamps where the import cut-off has not yet exhausted the available stock.
• Other technologies occupy a negligible niche in heritage and specialty applications, and the technology question in security lighting has resolved to which LED platform, which sensor, and which control protocol rather than which light source.
By Control Type
• Manual control is confined to legacy and low-compliance residential applications because it cannot satisfy the IGCC's automatic-control requirement or the Dark Sky expectation that security lighting be off when not needed.
• Motion-activated control is the fastest-growing control type because it satisfies both the energy-code requirement and the security function by illuminating only when movement is detected, and the sensor's certification to IEC 60669-2-1 and its detection range determine whether the product can be specified for a given mounting height and coverage area.
• Photocell-activated control provides dusk-to-dawn operation and is the specification for perimeter and area lighting where continuous illumination is required for CCTV, and the ANSI C136.41 receptacle standardises the interface between the photocontrol and the luminaire's driver, with products offering the 7-pin receptacle as an option for twist-lock photocontrols or wireless control modules.
• Smart and network-controlled lighting is the fastest-advancing control type because it allows the luminaire to be integrated into the building or campus security system, and the UK PSTI and EU Cyber Resilience Act obligations attach to the network interface, which makes the cybersecurity statement a condition of market access for this control type.
Don't pay for what you don't need. Save 30%
Customise your report by selecting specific countries or regions
By Application
• Residential security is the largest volume application segment because porch lights, driveway floodlights, and garage wall lights are installed on the majority of detached and semi-detached homes, and the Dark Sky 3000K and full-cutoff requirements are most directly applied in residential zoning where the light trespass onto neighbouring properties is a planning concern.
• Commercial premises use security lighting for parking areas, loading docks, and building perimeters, and the IGCC's 0.1 W/ft² continuous-lighting limit and the automatic-control requirement are the governing code provisions.
• Industrial facilities use high-output floodlights and perimeter lights for yard, fence-line, and tank-farm illumination, and the illuminance requirement is set by the security standard rather than by the general lighting code, with the DOE's 0.5 foot-candle requirement at the outer edge of the clear zone for intrusion-detected perimeters.
• Public infrastructure, including transport hubs, utilities, and municipal facilities, uses security lighting that must satisfy both the security standard and the public-procurement requirements, and the Dark Sky and energy-code obligations apply alongside the security function.
• Critical infrastructure, including energy, water, and communications facilities, is the most standards-intensive application because the lighting is part of a regulated security plan, and the 2.2 lux minimum service lighting intensity for protected facilities under the relevant federal regulations sets a floor that the design must meet.
By End User
• Residential end-users are the largest volume segment, and the procurement is driven by the Dark Sky compliance and the DIY installation requirement rather than by a formal security standard.
• Commercial end-users constitute the largest specification-driven segment because the IGCC and the local energy code impose the automatic-control and power-density requirements, and the building owner relies on the luminaire's certification to demonstrate compliance.
• Industrial end-users require the high-output and perimeter products that satisfy the security standard's illuminance requirements, and the procurement is shaped by the facility's security plan rather than by the general lighting code.
• Government and public-sector end-users operate under the most prescriptive framework because the security lighting is part of a regulated security plan, and the FEMA and DOE guidance on perimeter lighting, alongside the Dark Sky and energy-code requirements, determines the specification, with the public-procurement channel adding certification and domestic-content dimensions to the evaluation.
Regional Analysis • North America operates under UL 1598 and UL 8750 for the luminaire and LED-equipment listing, NFPA 70 (NEC) for the electrical installation and emergency egress connection, and NFPA 101 for the one foot-candle egress illumination requirement, alongside the International Green Construction Code's 0.1 W/ft² continuous-lighting limit and the automatic-control requirement for additional security lighting. The Dark Sky ordinances in jurisdictions including Ventura County and Amador County cap CCT at 3000K and require full-cutoff construction, and the DOE and NRC security guidance specifies 0.5 foot-candles at the outer edge of the clear zone for intrusion-detected perimeters and 2.2 lux for protected facilities.
• Europe applies EN 60598-1 and EN 60598-2-5 for floodlight safety, EN 62471 for photobiological safety, and the CE marking under the Low Voltage and EMC Directives, with the EU Regulation 2022/278 and the Ecodesign framework phasing out HID and halogen lamps and the member-state Dark Sky provisions imposing 3000K and full-cutoff requirements in jurisdictions that have adopted them.
• The United Kingdom applies the UKCA marking for the electrical and EMC aspects and the PSTI regime for connectable products, with the PSTI statement of compliance citing ETSI EN 303 645 as the deemed-compliance basis and requiring a defined support period and a vulnerability-reporting contact.
• China applies the CCC certification for luminaires under the GB/T 7000.1 series and the GB standards for the electrical safety of the control gear, with the smart-lighting interoperability requirements under GB/T 42892-2026 making DALI-2 compatibility a mandatory test item for smart lighting products from June 2026.
• India applies the BIS registration for the electrical portion of the luminaire and the IS 10322 series for luminaire safety, with the National Building Code and the local municipal lighting requirements providing the installation framework.
• Gulf and broader Middle East apply SASO and ESMA certification for the luminaire and reference the IEC 60598 and EN 62471 standards, with the region's critical-infrastructure and giga-project security specifications adding the Dark Sky and perimeter-illuminance requirements to the procurement documentation.
• Australia applies the RCM marking framework and the AS/NZS 60598 series, with the state road and public-space lighting specifications referencing the 3000K and full-cutoff requirements that the Dark Sky movement has promoted.
Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031
Aspects covered in this report
• Global Security Lighting Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation
By Product Type
• Floodlights
• Motion-Sensor Lights
• Wall-Mounted Security Lights
• Perimeter Lights
• Integrated Camera Lights
By Technology
• LED
• HID
• Halogen
• Other Technologies
By Control Type
• Manual
• Motion-Activated
• Photocell-Activated
• Smart / Network-Controlled
By Application
• Residential Security
• Commercial Premises
• Industrial Facilities
• Public Infrastructure
• Critical Infrastructure
By End User
• Residential
• Commercial
• Industrial
• Government & Public Sector
One individual can access, store, display, or archive the report in Excel format but cannot print, copy, or share it. Use is confidential and internal only. License information
One individual can access, store, display, or archive the report in PDF format but cannot print, copy, or share it. Use is confidential and internal only. License information
Up to 10 employees in one region can store, display, duplicate, and archive the report for internal use. Use is confidential and printable. License information
All employees globally can access, print, copy, and cite data externally (with attribution to Bonafide Research). License information