Loading Bonafide Research

Global LED Cold Storage Lights Market Outlook, 2031

Global LED Cold Storage Lights Market gains as HACCP audits and IP69K washdown rules force certified fixtures.

Market Insights LED cold storage lighting is designed to operate under demanding conditions where low temperatures, moisture, frequent cleaning and food-safety requirements affect fixture selection. Unlike standard industrial luminaires, these products must maintain electrical safety, structural integrity and hygiene performance across different cold-storage environments. In North America, UL 1598 and UL 8750 provide the baseline safety requirements for luminaires and LED equipment. However, these listings alone do not establish suitability for food-processing environments. NSF/ANSI 2 addresses food-equipment sanitation requirements, including the non-food and splash zones of lighting fixtures. Its assessment considers lens design, material durability and fixture construction to ensure that products can be cleaned without introducing contamination risks. Consequently, an IP-rated fixture does not automatically qualify for food-zone applications because ingress protection does not demonstrate hygiene or material suitability. Food-safety management systems introduce additional inspection and documentation requirements. HACCP identifies broken lenses, loose screws and damaged gaskets as potential physical contamination hazards.

Standards and certification schemes such as BRC, IFS and FSSC 22000 build on HACCP principles and require documented shatter protection, glass and brittle-plastic registers, and regular fixture inspections. Food-grade lighting therefore commonly incorporates shatter-resistant construction, 316 stainless steel or food-grade polycarbonate housings, and smooth, crevice-free surfaces. NSF/ANSI 2 and HACCP International certification provide additional evidence of suitability for relevant food-processing environments. HACCP-certified LED battens rated to -35°C for cool rooms and freezers illustrate the combination of temperature resistance and hygiene requirements. Operating temperature and ingress protection are the primary technical considerations across cold-storage zones. Standard industrial LEDs are typically rated to -20°C, which can support many cool-room and cold-room applications. Deep-freeze environments operating at -25°C and below require more specialised solutions, including drivers rated to -40°C. Acuity Brands FEM LED and EMW LED products, for example, are rated from -40°F (-40°C) to 113°F (45°C). The Sammode BERING X-Cold VLT uses a specifically calibrated remote driver designed to accommodate temperature variations, with the driver positioned outside the cold zone.

What's Inside a Bonafide Research`s industry report?

A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.

Download Sample


Ingress protection requirements also vary according to operating conditions:
• Loading docks and dispatch areas: IP65 minimum, with IK08 for forklift operating areas.
• Cool rooms with weekly hose-down: IP66 minimum.
• Cold rooms with daily condensation: IP66, sealed driver compartments and stainless steel hardware to reduce corrosion risks.
• Deep-freeze rooms with defrost-cycle steam: IP67 minimum.
• High-pressure food-processing washdown: IP69K, with specified products designed to withstand 1,450 psi hose-downs and water temperatures of 80°C at 100 bar.

Gasket materials also influence service life. Silicone maintains flexibility at -25°C, whereas EPDM gaskets can harden and crack under low-temperature conditions. Certification and regulatory coverage determine whether manufacturers can access specific geographical markets and food-processing projects. The standards serve different purposes and cannot be treated as interchangeable. UL 1598 addresses fixture safety, UL 8750 covers LED equipment, and NSF/ANSI 2 evaluates relevant sanitation requirements. Similarly, CE and RoHS support European market compliance, while DLC listing can provide access to North American utility rebate programmes. Procurement requirements therefore vary by project: European installations may require CE and RoHS, North American projects may specify UL and DLC, and food cold-storage facilities may additionally require NSF certification. Buyers must also verify that certificates correspond to the exact product model, as a certificate number alone does not establish that the supplied specification meets the required standards. Temperature and ingress engineering separate suppliers capable of serving deep-freeze and intensive washdown environments from those focused on loading docks and conventional cool rooms. Fixtures rated to -40°C with IP67 and appropriate sanitation certification can address demanding freezer applications involving defrost-cycle steam. Products rated to -20°C with IP65 are more suited to loading docks and dispatch areas. Material selection is equally important: silicone gaskets retain flexibility at -25°C, whereas EPDM alternatives may harden and crack, affecting long-term sealing performance. Driver architecture and thermal reliability are additional competitive differentiators. LED forward voltage changes with temperature, so an inadequately specified driver may fail to start or operate outside its regulation range in cold environments. Remote-driver designs help address this issue by positioning sensitive electronics outside the cold zone. The Sammode BERING X-Cold VLT, for example, places its driver outside the refrigerated area on a gear tray located up to 50 metres away. Cold-rated driver solutions such as the Tridonic LCI series are specified for operation from -40°C to +80°C.

Market Dynamics Driver: HACCP audit obligations and cold-chain capacity growth converting the fixture into an audited component
• The HACCP, BRC, IFS, and FSSC 22000 audit regimes and the sustained growth of global cold-chain capacity have converted LED cold storage lighting from a condition-based replacement category into an audited component whose specification is determined by the inspector’s checklist rather than by the facility’s illumination preference.
• HACCP requires the food business to identify physical hazards and establish critical control points, and lighting falls within that control because a broken lens or a dislodged fastener is a contamination risk, with auditors asking whether all fixtures in food-contact zones are shatterproof, whether the facility maintains a documented glass and brittle-plastic register, and whether fixtures are regularly inspected for damage.
• The cold-chain capacity growth reinforces the demand because the Global Cold Chain Alliance reported 8.16 billion cubic feet of temperature-controlled capacity among its warehouse members in 2025, a 10 percent increase, and India alone had 8,815 cold storages with 40.22 million metric tonnes of capacity as of June 2025, which means the installed base of cold rooms requiring compliant lighting is expanding rather than being replaced at a steady state.
• The consequence is that a cold storage facility cannot open or pass an audit without lighting that satisfies the hygiene and temperature requirements, and the audit event is the point at which the lighting system is purchased or replaced.

Make this report your own

Have queries/questions regarding a report

Take advantage of intelligence tailored to your business objective

Reecha Roy

Reecha Roy

Research Analyst



Challenge: Zone-specific ingress fragmentation and the driver-cold-start gap
• The principal constraint on LED cold storage light market access is that the IP rating and the temperature rating are zone-specific, and a single fixture cannot serve the loading dock, the cool room, the cold room, and the deep-freeze room without separate engineering and certification.
• A luminaire with IP65 and a -20°C rating is adequate for the loading dock and the dispatch area, but it is excluded from the deep-freeze room where IP67 and -40°C are the minimum, and a luminaire with IP69K for the washdown corridor may not carry the NSF/ANSI 2 certification that the food-zone splice area requires.
• The driver-cold-start gap compounds the fragmentation because LED forward voltage rises significantly as temperature falls, and a driver that is rated to the luminaire’s ambient temperature but not to the cold-start condition may fail to ignite the lamp or may drift out of current regulation, which is why the remote-driver architecture is specified in deep-freeze applications and why standard drivers rated only to -20°C are insufficient for the -25°C and below installations that Indian and European cold chains increasingly require.
• The condensation dimension adds a third constraint because warm humid air entering a cold room condenses on the fixture surface, and a luminaire whose gasket and housing are not designed for repeated thermal cycling will admit moisture through the seal rather than through the lens, which is why silicone gaskets and sealed driver compartments are specified in cold rooms.

Trend: Remote-driver architecture and integrated sensing shifting the value from the housing to the thermal and controls engineering
• LED cold storage lighting is migrating from self-contained fixtures with integral drivers toward remote-driver architectures and integrated sensing, and the product evidence shows that the competitive frontier is the thermal and controls engineering rather than the housing material.
• The Sammode BERING X-Cold VLT places the LED driver outside the cold zone on a gear tray up to 50 metres from the luminaire, which removes the driver from the thermal-cycling environment and allows the fixture to operate at -40°C without a cold-rated driver at the luminaire head.
• The Tridonic LCI series is specified for -40°C to +80°C operation with a nominal lifetime up to 80,000 hours, which indicates that the driver’s thermal range is now a published specification rather than an implied capability.
• The sensing trend is visible in the Dextra Forteco Chill, which is supplied with an integral R11 presence-detection sensor to ensure the luminaires operate only during periods of occupancy, and the energy-savings case is documented at up to 73 percent in cold-storage retrofits and 75 percent per freezer in retail display lighting.
• The competitive value is shifting from the cast housing to the driver’s thermal placement and the sensor’s integration, because a luminaire that is correctly certified but whose driver fails at -30°C is a maintenance liability in a facility where a service call requires a permit and a production interruption.

Segmentation Analysis By Product Type
LED linear lights constitute the volume specification for cold rooms and freezer rooms because the linear form factor allows a continuous light line along the racking aisle with minimal crevices where moisture can collect, and the 600 mm or 1200 mm weatherproof LED batten with IP66 is the most common fixture for cool rooms and cold rooms.
LED high-bay lights serve the high-ceiling refrigerated warehouses and distribution centres where the mounting height exceeds the reach of a linear batten, and products such as the Isollux Cryolux purpose-designed ultra-low-profile high bay with IP66 for cold stores and freezers illustrate the specialised form factor that the segment requires.
LED panel lights address inspection and quality-control areas within cold storage facilities where a diffuse uniform distribution is required, and the panel’s CRI is the specification variable because inspection stations require CRI ≥85 to ≥90 to detect spoilage and bruising.
LED vapor-tight lights are the workhorse fixture for food-processing cold areas and washdown corridors, and the vaportight construction with a one-piece seamless fiberglass housing that won’t corrode, rust, or crack, combined with a continuous non-porous gasket, is the design response to the condensation and chemical-exposure regime.
LED bulkhead lights serve stairwells, anterooms, and small cold rooms where a compact sealed fixture is preferred, and the bulkhead’s IP66/IP67 rating and stainless steel hardware are the selection criteria in high-humidity cold air. Other specialty lights, including HACCP-certified battens and emergency cold-storage luminaires with lithium battery technology for -40°C operation, complete the segment set and are specified where the standard fixture forms do not meet the application’s temperature or certification requirement.

Don't pay for what you don't need. Save 30%

Customise your report by selecting specific countries or regions

Specify Scope Now
Reecha Roy


By Installation
• New installation is the configuration for greenfield cold-chain projects and facility expansions, and the fixture selection is driven by the designed operating temperature of each zone, the washdown regime, and the food-safety certification that the facility’s HACCP plan requires.
• Retrofit and replacement is the larger volume segment because the installed base of cold storage facilities is being converted from fluorescent and high-intensity discharge sources to LED, and the documented energy savings of up to 73 percent in cold-storage retrofits and 75 percent per freezer in retail display lighting are the financial basis for the conversion.
• The retrofit decision is also driven by the fluorescent lamp’s poor cold-weather performance, because fluorescent luminous flux decreases significantly in cold stores and LED luminaires are better suited to the environment.
• The retrofit segment’s specification challenge is that the existing fixture’s mounting points and wiring may not match the replacement’s requirements, and the remote-driver architecture can be an advantage in retrofit because the driver can be located at the existing gear tray position rather than at the luminaire head.

By Protection Rating
Standard fixtures are confined to the loading dock and ambient warehouse areas where the temperature is above freezing and the washdown regime is limited to occasional cleaning, and they are excluded from the cold room and freezer room regardless of their electrical safety listing. IP65 fixtures are the baseline for cool rooms and general cold-storage areas where the protection requirement is dust-tight construction and protection against water jets, and IP65 is the common protection rating for cold storage in the Chinese and Indian markets as well as in European cool rooms. IP66 fixtures are the specification for cold rooms with daily condensation and weekly hose-down, and the sealed driver compartment and stainless steel hardware are the additional requirements that the cold-room environment imposes. IP67 and above fixtures are the specification for deep-freeze rooms where defrost-cycle steam and temporary-submersion-equivalent exposure occur, and IP69K is the specification for food-plant washdown corridors where high-pressure, high-temperature water and steam are applied.

By Application
• Cold rooms are the largest application segment because the 0°C to +4°C range covers dairy, pharmaceutical, and fresh-produce storage, and the fixture must satisfy the zone-specific IP rating, the CRI ≥80 requirement for label reading and product distinction, and the NSF/ANSI 2 certification where the room is in a food facility.
• Freezer rooms at -18°C to -25°C require IP67 and a cold-rated or remote driver, and the defrost-cycle steam and thermal cycling are the engineering challenges that distinguish this segment from the cold room.
• Refrigerated warehouses and distribution centres use high-bay luminaires over the racking and linear fixtures in the aisles, and the illuminance requirement is set by the task rather than by the storage function, with IS 3646 Part 2 specifying 150–200 lux for general storage and 300–500 lux for order picking and packing in the Indian market.
• Food-processing cold areas require the full hygiene certification stack, including NSF/ANSI 2 or HACCP International, shatter protection, and CRI ≥85 in inspection zones, because the cold area is often the point at which the product is exposed and the inspection is performed.
• Pharmaceutical cold storage requires the temperature qualification and the data-integrity documentation that the pharmaceutical quality system imposes, and the fixture’s temperature performance and its calibration record become part of the facility’s validation file rather than a maintenance item.

By End User
• Food and beverage manufacturers are the most standards-intensive end-user segment because the cold storage is part of a HACCP, BRC, IFS, or FSSC 22000 audited facility, and the fixture must satisfy the hygiene certification, the shatter protection, and the temperature and IP requirements simultaneously.
• Pharmaceuticals and healthcare require cold storage for vaccines, biologics, and temperature-sensitive medicines, and the fixture’s temperature stability and the documented thermal-cycling performance are the selection criteria, with the remote-driver architecture preferred where the luminaire must operate at -40°C.
• Retail and supermarkets use cold storage lighting in walk-in coolers and freezer display cases, and the energy-savings case is strongest in this segment because the display lighting operates continuously and the freezer’s refrigeration load is directly affected by the lighting’s heat output, with Philips reporting 75 percent energy savings per freezer after LED conversion.
• Logistics and warehousing operators use cold storage lighting in distribution centres and refrigerated warehouses, and the high-bay and linear fixtures are specified against the IS 3646 or EN 12464-1 illuminance tiers, with the retrofit economics driven by the 73 percent savings documented in cold-storage retrofits.
• Other industries, including cut-flower storage and laboratory cold rooms, use the same certified fixtures at smaller scale, and the certification requirement follows the application’s hygiene and temperature profile rather than the industry label.

Regional Analysis • North America operates under UL 1598 and UL 8750 for the fixture’s electrical safety, NSF/ANSI 2 for the food-zone and splash-zone cleanability, ETL Sanitation Listing as the evidence route, and DLC listing for utility rebate eligibility, with the FDA Food Code requiring at least 108 lux in walk-in refrigeration units and dry food storage areas at 30 inches above the floor and 215 lux in walk-in refrigeration units under the 20-foot-candle provision, alongside the USDA and FDA inspection regimes that treat shatterproof construction as a physical-hazard control.
• Europe applies the CE marking under the Low Voltage Directive and EMC Directive, RoHS for hazardous-substance restriction, and EN 12464-1 for the illuminance requirement, which sets 100 lux for storage and stockrooms rising to 200 lux where continuously occupied and 300 lux for dispatch and packing, with cold stores specifically addressed at the 200 lux maintained illuminance level for continuously occupied workstations and the note that fluorescent luminous flux decreases significantly in cold stores, making LED the preferred source.
• China’s GB 50072-2021 cold-storage design standard requires that cold-room luminaires be selected for food-safety compliance and cold-room environmental conditions with rapid-start energy-efficient operation, sets the cold-room illuminance at not less than 50 lux and the colour rendering index at not less than 60, and requires SELV supply at 24 V AC where the luminaire is installed at or below 2.2 metres in the low-temperature and high-humidity cold room, with GB 7000.1-2015 and GB/T 4208-2017 providing the safety and IP-test basis.
• India’s IS 3646 Part 2 specifies the lux tiers for cold storage, with 150–200 lux for general storage, 200–300 lux for loading and dispatch, 300–500 lux for order picking and packing, and 500–750 lux for quality inspection, and the BIS framework alongside the ECBC provides the compliance route for the luminaire’s electrical safety and the facility’s energy performance.
• Saudi Arabia and the Gulf operate under SASO certification for the luminaire’s electrical safety and the SFDA food-safety framework, with the region’s cold-chain investment in dairy, poultry, and pharmaceutical logistics creating the specification channel for NSF/ANSI 2 and IP69K fixtures.
• Australia applies the RCM marking framework and AS/NZS 1680 for interior lighting, with the cold-storage illuminance requirement set by the task and the food-safety regime aligned with the FSANZ Code and the facility’s HACCP plan.

Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031

Aspects covered in this report
• Global LED Cold Storage Lights Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Product Type
• LED Linear Lights
• LED High-Bay Lights
• LED Panel Lights
• LED Vapor-Tight Lights
• LED Bulkhead Lights
• Other Specialty Lights

By Installation
• New Installation
• Retrofit / Replacement

By Protection Rating
• Standard
• IP65
• IP66
• IP67 and Above

By Application
• Cold Rooms Freezer
• Rooms Refrigerated Warehouses
• Food Processing Cold Areas
• Pharmaceutical Cold Storage

By End User
• Food & Beverage
• Pharmaceuticals & Healthcare
• Retail & Supermarkets
• Logistics & Warehousing
• Other Industries

Request Table of Contents

First Name

Last Name

Company Name

Job Title

Business Email

Contact Number

Description
Logo

Global LED Cold Storage Lights Market Outlook, 2031

ChatGPT Summarize Gemini Summarize Perplexity AI Summarize Grok AI Summarize Claude Summarize

Contact usWe are friendly and approachable, give us a call.