Loading Bonafide Research

Global IR Illumination Market Outlook, 2031

Global IR Illumination Market rises on IEC 62471-7:2023 infrared hazard limits and laser Class 1M classification.

The global IR illumination market is a certification-driven sensor-support market rather than a conventional lighting market. Product acceptance depends on demonstrating photobiological safety, compatibility with surveillance or machine-vision cameras, and protection against the operating environment. IEC 62471 is the foundational photobiological safety standard. Its Part 7, published as BS EN IEC 62471-7:2023, specifies the assessment of electrical light sources and luminaires in normal use. It covers exposure limits for blue light, thermal, UV, UV-A, infrared and skin hazards across the 200 nm to 3,000 nm range, including a dedicated assessment of infrared radiation hazards to the eye from 780 nm to 3,000 nm. IR illuminators using 850 nm and 940 nm sources require particular attention because the light is invisible or nearly invisible to the human eye and may not trigger the natural aversion response that helps prevent overexposure. Products therefore require a risk-group classification, such as exempt, RG0 or RG1, according to the applicable assessment. Laser-based illuminators follow a separate safety classification under IEC 60825-1, which applies to laser products emitting radiation from 180 nm to 1 mm. Class 1M is relevant to laser illuminators used in machine vision and structured-light applications. These products are considered safe to view with the naked eye but may be hazardous when viewed through magnifying optical instruments such as binoculars, microscopes or telescopes. An 835 nm structured-light source operating at 200 mW is an example of an industrial vision camera implementation. Its safety classification must be established against the accessible emission limit rather than wavelength alone. In the United States, FDA regulation 21 CFR 1040.10 also applies to laser products manufactured or assembled for the market. It requires protective housing that prevents human access to radiation exceeding Class I limits.

Electromagnetic compatibility and electrical-safety requirements vary by jurisdiction. In the United States, FCC Part 15 Subpart B applies to unintentional radiators. Infrared is not radio frequency, so an IR illuminator is not treated as an intentional RF radiator. However, its clock frequency determines whether testing is required: devices with clock frequencies below 9 kHz fall outside the stated FCC DoC testing requirement, while devices above 9 kHz are subject to Class A or Class B limits according to their intended commercial or residential market. Commercial IR illuminators commonly carry FCC Part 15 Class A certification, while Class B applies to consumer-facing products. The AXIS T90D20 PoE IR-LED Illuminator, for example, carries FCC Part 15.107 and 15.109 Class B alongside ICES-003 Issue 6 Class B. In Europe, the EMC Directive 2014/30/EU applies, with EN IEC 61547:2023 replacing the 2009 edition as the immunity standard for lighting equipment. The revised standard explicitly covers ultraviolet and infrared radiation equipment, with mandatory application from 8 March 2026. Electrical safety is addressed through UL 62368-1 and its IEC equivalent, which classify energy sources and prescribe safeguards against radiated optical energy. The AXIS TQ1919-E IR Illuminator Kit carries IEC/EN/UL 62368-1 Edition 3 alongside an IEC/EN 62471 exempt risk-group classification.

What's Inside a Bonafide Research`s industry report?

A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.

Download Sample
Environmental protection and interoperability requirements further differentiate the market. IP66, IP67 and IP68 ratings under IEC 60529 address protection against dust and water exposure, including powerful water jets, temporary immersion and continuous immersion. The broader product scope also includes IP69K-rated equipment. Illuminators used in oil and gas, chemical and mining environments may require ATEX and IECEx certification for Zone 1 and Zone 2 gas environments and Zone 21 and Zone 22 dust environments. Products such as the Raytec SPARTAN range and Eaton Oxalis EXIR40F combine hazardous-area certifications with environmental protection ratings. ONVIF Profile S provides network-video interoperability, allowing an IP illuminator to be discovered, configured and controlled through a video management system (VMS) in multi-vendor surveillance deployments. Competition in the IR illumination market is shaped by three main factors: certification coverage, source technology and application-engineering capability. Suppliers need to demonstrate compliance across IEC 62471, IEC 60825-1, FCC Part 15, the EU EMC Directive, UL 62368-1, IP protection and ATEX/IECEx requirements, while also supporting ONVIF interoperability.

Certifications are not interchangeable. An illuminator classified as an exempt risk group under IEC 62471 is not automatically certified as a Class 1M laser product under IEC 60825-1. Similarly, a product designed for the professional surveillance market with FCC Part 15 Class A compliance may not meet the Class B requirements applicable to consumer-facing products. Hazardous-area certification provides a competitive distinction for suppliers targeting oil and gas, mining and industrial surveillance. These products must combine ATEX and IECEx certification with suitable IP protection and photobiological safety classification. The Pelco MLX2830AA and Videotec MAXIMUS MLX illustrate this product category through AISI 316L stainless steel construction, IP66 through IP69 protection ratings and Zone 1 and Zone 2 certification. Source technology determines the performance range and energy requirements. LED-based illuminators deliver approximately 25% electro-optical efficiency, with the remaining energy largely dissipated as heat. Their usable range is generally limited to tens of metres because of optical and thermal constraints. Laser-based illuminators can achieve 50% or higher electro-optical efficiency and provide greater directionality and monochromaticity, supporting illumination over hundreds of metres. These characteristics make laser technology suitable for long-range perimeter surveillance and machine vision.

Market Dynamics Driver: Photobiological safety and laser-classification requirements
• Photobiological safety and laser-classification standards have made product certification a key requirement in professional IR illumination procurement. Buyers increasingly need documented evidence of the illuminator's safety classification before specifying it for workplace, public-space or industrial applications.
• IEC 62471-7:2023 establishes the application-related assessment and exposure limits for infrared radiation hazards to the eye and skin. Products without the required risk-group classification may be excluded from deployments where safety documentation is audited. Laser-based products must also comply with IEC 60825-1, which defines laser safety classes, including Class 1M for products that are safe to view with the naked eye but may present a hazard through magnifying optics. In the United States, FDA 21 CFR 1040.10 adds protective-housing and accessible-emission-limit requirements for laser products.
As a result, certification and documented safety performance are important factors in product selection, alongside optical output, price and operating range.

Make this report your own

Have queries/questions regarding a report

Take advantage of intelligence tailored to your business objective

Reecha Roy

Reecha Roy

Research Analyst

Challenge: Certification fragmentation and the IR-versus-RF regulatory distinction
• Manufacturers face different compliance requirements across markets, making international product certification complex. IR illumination also follows a less obvious compliance pathway than conventional lighting because infrared is not classified as radio frequency under FCC Part 15. Although an IR illuminator is not an intentional RF radiator, its clock frequency can still determine whether testing is required. Devices operating above 9 kHz are subject to the applicable Class A or Class B limits.
• Europe applies the EMC Directive 2014/30/EU and EN IEC 61547:2023, which explicitly covers infrared radiation equipment and became mandatory on 8 March 2026. Products certified under the previous edition may therefore require reassessment.
• Hazardous-area applications add ATEX and IECEx certification requirements. China requires applicable lighting equipment to meet CCC requirements under GB 17743-2021 for radio disturbance and GB 17625.1-2022 for harmonic current. Saudi Arabia exempts infrared heating luminaires from SASO 2870, while a separate rule requires night-vision equipment to meet an IEC 62471 Edition 2 RG0 assessment from 1 October 2026. These differences create additional testing, documentation and certification requirements for manufacturers serving multiple markets.

Trend: Laser-source adoption and ONVIF integration
• IR illumination is moving beyond standalone LED floodlights towards laser-based products and ONVIF-integrated network devices. The main competitive opportunity is increasingly linked to system integration, safety classification and long-range performance rather than the emitter alone.
• Laser sources can achieve electro-optical efficiency of 50% or more, compared with approximately 25% for LEDs. Their directionality and monochromatic output also support illumination over hundreds of metres, making them suitable for long-range perimeter and critical-infrastructure surveillance.
• ONVIF Profile S allows illuminators to be discovered and controlled through a VMS. Products such as the AV Costar MegaBall G2 and Redvision RVK-E40-IR use ONVIF Profile S and G compliance as a product differentiator alongside IR range and IP protection.
• The transition also increases the importance of safety documentation. Laser-based products require IEC 60825-1 classification alongside the applicable IEC 62471 risk-group assessment and FCC Part 15 verification. Suppliers able to provide this combined certification portfolio can serve a broader range of professional applications.

Segmentation Analysis By Product Type
• IR illuminators form the core product category, with suitability determined by the combination of IEC 62471 risk-group classification, beam angle, illumination range and IP rating. IR LED floodlights are widely used for perimeter, yard and general surveillance. The 850 nm and 940 nm wavelengths are the main choices: 850 nm provides higher camera-sensor sensitivity, while 940 nm reduces the visible red glow that could alert intruders.
• IR spotlights serve targeted and long-range applications. Laser-based spotlights support extended illumination distances and are relevant to machine vision and critical-infrastructure surveillance. IR illuminator arrays combine multiple emitters or laser sources in a single housing to provide wider coverage. Their thermal design and driver architecture influence output stability across operating temperatures, while hazardous-area models require suitable explosion-proof construction and IP66, IP67 or IP68 protection.

Don't pay for what you don't need. Save 30%

Customise your report by selecting specific countries or regions

Specify Scope Now
Reecha Roy
By Wavelength
• The 700–850 nm band is widely used in surveillance and machine vision because camera sensors generally have high quantum efficiency in this region. An 850 nm source can provide a strong return signal for a given electrical input.
• The 850–940 nm band serves applications where the visible red glow of 850 nm illumination is undesirable. The 940 nm wavelength is particularly relevant to covert surveillance and consumer-facing environments where visible emission may be noticeable.
• Wavelengths above 940 nm serve specialised applications, including selected machine-vision tasks and defence night-vision compatibility. Selection depends on the IEC 62471 hazard weighting and the camera's spectral response, in addition to emitter efficiency.

By Technology
• LED-based illuminators represent the volume segment because they are cost-effective, available across the 700–940 nm range and suitable for the broad beam angles required in perimeter and general surveillance. Their approximately 25% electro-optical efficiency limits long-range performance and makes thermal management an important design consideration.
• Laser-based illuminators are advancing in long-range surveillance and machine-vision applications. Their 50%-plus electro-optical efficiency, directionality and monochromaticity support illumination over hundreds of metres. Class 1M classification allows these products to be used safely under the specified viewing conditions, although magnifying optics can introduce additional hazards.

By Application
• Security surveillance is the largest application segment for IR illumination. It includes perimeter and after-hours monitoring across commercial, industrial and public environments. Important requirements include IEC 62471 risk-group classification, FCC Part 15 Class A or B verification and ONVIF Profile S integration for VMS control.
• Machine vision uses IR illumination for inspection tasks where visible light is unsuitable or where operations must remain independent of ambient lighting. IEC 62471 assessment is important in workspaces shared with people, particularly for high-intensity infrared sources.
• Automotive night vision uses IR illumination in driver-assistance and pedestrian-detection systems. The source material identifies UNECE requirements that no red light should be visible at 25 metres in front of the vehicle and that the infrared source should activate only when the headlamp is switched on and the vehicle is moving forward.
• Industrial inspection applications include moisture detection, coating-thickness measurement and material sorting. Wavelength and intensity are selected according to the material's reflectance characteristics and the sensor's response.
• Defence and aerospace applications use IR illumination for night-vision-goggle-compatible operations. MIL-STD-3009 specifies that lighting must not emit excessive energy in the 625–930 nm spectral band, where most image-intensification NVG devices are sensitive. NVIS Radiance Intensity requirements also apply to search and landing lights.

By End-user
• Commercial end-users, including retail, banking and corporate campuses, use IR illumination for perimeter and after-hours surveillance. Procurement priorities include ONVIF integration and suitable IP protection rather than hazardous-area certification.
• Industrial end-users deploy IR illuminators for machine vision and process inspection. IEC 62471 assessment and environmental protection ratings are important, with ATEX and IECEx certification required where equipment operates in classified hazardous zones.
• Government and defence end-users use IR illumination for critical-infrastructure protection, border surveillance and night-vision-compatible operations. Their requirements include MIL-STD-3009 and NVIS compliance alongside IEC 62471 and IEC 60825-1 classifications.
• Automotive end-users integrate IR illumination into night-vision and driver-assistance systems. UNECE regulations and vehicle-level electromagnetic compatibility and safety requirements govern product specifications rather than general luminaire standards.

Regional Analysis • North America follows FCC Part 15 Subpart B for unintentional radiators. Class A applies to commercial and industrial products, while Class B applies to consumer-facing products. The 9 kHz clock-frequency threshold determines whether testing is required. UL 62368-1 Editions 3 and 4 provide the electrical-safety framework for audio/video and information and communication technology equipment, including relevant professional illuminators. FDA 21 CFR 1040.10 applies to laser-based products and establishes protective-housing and accessible-emission-limit requirements.
• Europe applies the EMC Directive 2014/30/EU and EN IEC 61547:2023 for immunity requirements covering lighting equipment, including ultraviolet and infrared radiation equipment. The revised standard became mandatory on 8 March 2026. Photobiological safety is addressed through IEC 62471-7:2023, while laser products follow IEC 60825-1.
• China requires applicable lighting equipment to meet CCC requirements under GB 17743-2021 for radio disturbance and GB 17625.1-2022 for harmonic current. The CCC scope covers lighting products into which IR illuminators may be integrated.
• Saudi Arabia exempts infrared heating luminaires from SASO 2870. However, from 1 October 2026, night-vision equipment must complete an IEC 62471 Edition 2 photobiological safety assessment and submit a third-party laboratory report confirming an RG0 no-hazard result. This makes the safety assessment an important market-access requirement for the affected equipment.
• India's BIS framework applies to the electrical components of illuminators through the IS 302 series and the IS 10322 series for luminaires. The revised IS 10322 Section 3 introduces updated electrical-safety and ingress-protection requirements for LED luminaires.
• Japan requires PSE certification under the Electrical Appliance and Material Safety Act. Most lighting products are classified as non-specified electrical appliances and may qualify for circular PSE self-declaration, while the power supply may require the diamond PSE mark. South Korea requires KC certification under the Electrical Appliances Safety Control Act, with National Radio Research Agency conformity assessment applying where the illuminator includes a communication function.
• Brazil's INMETRO framework requires lighting-product certification under Portaria 144/2015 and Portaria 20/2017, with compliance dates for luminaires phased through 2027. Australia and New Zealand require RCM marking under the EMC framework. AS/NZS CISPR 32 Class A provides the emission standard, while EESS registration addresses the electrical-safety component.

Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031

Aspects covered in this report
• Global Lighting Connectors Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Product Type
• IR Illuminators
• IR LED Floodlights
• IR Spotlights
• IR Illuminator Arrays

By Wavelength
• 700–850 nm
• 850–940 nm
• Above 940 nm

By Technology
• LED-Based
• Laser-Based

By Application
• Security Surveillance
• Machine Vision
• Automotive Night Vision
• Industrial Inspection
• Defence & Aerospace

By End-user
• Commercial
• Industrial
• Government & Defence
• Automotive

Request Table of Contents

First Name

Last Name

Company Name

Job Title

Business Email

Contact Number

Description

IR Illumination Market Research FAQs

Key driver: Photobiological safety and laser-classification requirements. Key challenge: Certification fragmentation and the IR-versus-RF regulatory distinction. Key trend: Laser-source adoption and ONVIF integration.

The report uses 2020 as the historic year, 2025 as the base year, 2026 as the estimated year, with forecasts up to 2031.

The Global IR Illumination Market is analysed by product type (IR Illuminators, IR LED Floodlights, IR Spotlights, IR Illuminator Arrays); wavelength (700–850 nm, 850–940 nm, Above 940 nm); technology (LED-Based, Laser-Based); application (Security Surveillance, Machine Vision, Automotive Night Vision, Industrial Inspection, Defence & Aerospace); end-user (Commercial, Industrial, Government & Defence, Automotive).

The report covers Global.

This report is open for pre-booking. Pre-book it to receive the full report as soon as it is released. You can also request a free sample and the table of contents in the meantime.

Yes. Bonafide Research can add countries, segments or company profiles to match your requirements. Request customisation.
Logo

Global IR Illumination Market Outlook, 2031

ChatGPT Summarize Gemini Summarize Perplexity AI Summarize Grok AI Summarize Claude Summarize

Contact usWe are friendly and approachable, give us a call.