Loading Bonafide Research

Global Food Processing Lighting Market Outlook, 2031

Global Food Processing Lighting Market grows on NSF/ANSI 2 and IP69K washdown certification across food zones.

The global food processing lighting market is shaped by food-safety regulations, hygiene requirements, and environmental conditions within processing facilities. Lighting fixtures must meet different certification requirements depending on whether they are installed above exposed food, in splash zones, in high-pressure washdown areas, or in locations where combustible dust may accumulate. NSF/ANSI 2 is a food equipment standard covering the non-food and splash-zone portions of lighting fixtures. Since lighting products do not directly contact food, assessments focus on exposed fixture components, including lens design, durability, ingress protection, and construction. Certification involves product testing, material analysis, plant audits, and product-system conformity assessments. Unannounced plant inspections are also part of continued listing requirements. NSF/ANSI 2 certification demonstrates that a fixture has been evaluated for cleanability and non-toxicity in areas exposed to food-processing splashes and spills. An IP rating alone does not establish these food-equipment requirements.

IP69K is a separate ingress-protection qualification under ISO 20653 and IEC 60529. It verifies protection against high-pressure water jets at 100 bar and 85°C from any direction. This rating is particularly relevant to dairy, meat, poultry, and beverage facilities that carry out frequent high-pressure washdown. Manufacturers therefore commonly position IP69K and NSF certification together for food-processing and sanitation-sensitive applications. IEC 60598-2-24 addresses another risk: luminaires used in environments where conductive dust can accumulate on their surfaces. This is relevant to grain, flour, and animal-feed handling facilities, where heat accumulation can create an ignition risk. Luminaires carrying the D symbol under EN 60598-2-24 are intended for dusty food and beverage environments. They may also be designed to resist ammonia and cleaning agents, addressing chemical exposure in addition to dust-related surface-temperature risks. Food-safety regulations establish additional requirements for lighting quality and protection against contamination. In the United States, FDA 21 CFR 117.20(b)(5) requires adequate lighting in hand-washing areas, dressing and locker rooms, toilet rooms, and areas where food is examined, processed, packed, or held. It also requires safety-type bulbs, fixtures, and skylights, or other protective measures, where glass is suspended over exposed food during preparation.

What's Inside a Bonafide Research`s industry report?

A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.

Download Sample
The FDA Food Code recommends minimum illuminance levels of 108 lux in walk-in refrigeration, 215 lux in food preparation areas, and 540 lux where detailed work is performed. USDA FSIS Directive 5000.1 Revision 8, issued in January 2025, requires meat, poultry, and egg processing facilities to maintain lighting of good quality and sufficient intensity for sanitation and inspection. Inspection stations typically require 50 to 200 footcandles at a colour-rendering index (CRI) of 90 or higher. In Europe, EC Regulation 852/2004, Annex II, Chapter II, paragraph 7, requires adequate natural or artificial lighting in food production and distribution premises. Luminaires above areas where unpackaged food is handled must be enclosed to prevent contamination if a fixture breaks and to support cleaning. Supporting guidance recommends diffusers or protective tubes for fluorescent lamps, surface-mounted rather than suspended fixtures, and concealed cabling. China's GB 14881-2025, effective from September 2026, revises the general hygiene requirements for food production. It expands the lighting protection requirement from "exposed food and raw materials" to "exposed food" and requires safety-type luminaires or protective measures where fixtures are installed directly above exposed food. It also shifts the compliance measurement from general descriptions of gloss and brightness to measurable illuminance. India's FSSAI framework requires adequate lighting but does not specify exact lux levels in its regulation. Industry compliance benchmarks and FSSAI audits commonly apply minimum levels of 540 lux at working surfaces in food handling and processing areas and 1,080 lux in inspection and quality-control areas. Shatterproof or protected covers are also required in food-contact zones, with food safety officers checking that fixtures are recessed, shielded, or enclosed.

The certification portfolio is a key supplier qualification factor. IP69K demonstrates resistance to high-pressure and high-temperature water jets, but it does not establish food-equipment cleanability or non-toxicity under NSF/ANSI 2. Similarly, NSF/ANSI 2 does not qualify a fixture for dust-accumulation hazards covered by IEC 60598-2-24. Suppliers serving hazardous dust and gas environments must also consider ATEX and IECEx certification for applicable zones, including Zones 1, 2, 21, and 22. Products such as the Viamaster LED series and THT-EX explosion-proof tube light are examples of products positioned for food factories with flammable dust or gas risks. Material and sealing engineering determine how well fixtures withstand daily sanitation. Food processing facilities use chlorine, quaternary ammonium compounds, and peracetic acid during washdown. Standard powder-coated housings may corrode under these chemical conditions. Stainless steel 316 hardware is commonly specified in food plants because zinc hardware can corrode rapidly in dairy and meat-processing environments. Gasket materials must also be compatible with the facility's cleaning agents and refrigeration conditions. Audit documentation is another important competitive factor. Procurement teams and facility managers may need product cutsheets, certifications, and material declarations to satisfy FDA, USDA FSIS, NSF/ANSI 2, and Global Food Safety Initiative (GFSI) requirements. Relevant schemes include SQF Edition 10, released in March 2026 with audits beginning in January 2027, BRCGS Issue 9, and FSSC 22000. These schemes require documented lighting risk assessments and shatter protection across food zones, not only directly above exposed products. Suppliers that provide complete certification files and material declarations in formats suitable for inspection and auditing have an advantage over those offering only standard product datasheets. As a result, documentation capability is an important part of the purchasing decision alongside fixture performance and price.

Market Dynamics Driver: Food-safety audits and washdown requirements increasing demand for compliant fixtures
• Food-safety regulations and frequent sanitation cycles are making lighting fixtures an important part of facility compliance. FDA 21 CFR 117.20(b)(5) requires shatter protection for fixtures and glass suspended over exposed food, while GFSI schemes require documented lighting risk assessments and protection against contamination across food zones.
• USDA FSIS Directive 5000.1 Revision 8, issued in January 2025, requires appropriate lighting quality and intensity in meat, poultry, and egg processing facilities. Inspection stations typically require 50 to 200 footcandles at CRI 90 or higher, making colour rendering an important specification in inspection areas.
• Frequent washdown also increases the need for IP69K-rated fixtures capable of withstanding 100-bar water jets at 85°C. Fixtures without suitable sealing and housing materials may deteriorate under repeated sanitation exposure.
• Energy efficiency provides an additional adoption incentive. The NIST-documented Desert Gold Food Company retrofit achieved a 30 percent reduction in facility-wide electricity usage after replacing inefficient lighting across manufacturing, cold storage, loading docks, and offices. The project also projected annual energy-cost savings of more than $40,000, demonstrating the potential financial benefits of lighting upgrades alongside compliance improvements.

Make this report your own

Have queries/questions regarding a report

Take advantage of intelligence tailored to your business objective

Reecha Roy

Reecha Roy

Research Analyst

Challenge: Non-substitutable certifications and chemical-resistance requirements
• The main market-access challenge is that different certifications address different risks and cannot replace one another. IP69K verifies resistance to high-pressure and high-temperature water jets but does not establish resistance to chlorine, quaternary ammonium compounds, or peracetic acid. A powder-coated fixture may pass IP69K testing but still corrode under the cleaning chemicals used in dairy and meat-processing facilities.
• NSF/ANSI 2 addresses cleanability and non-toxicity in relevant food-equipment zones but does not qualify a luminaire for conductive-dust accumulation risks under IEC 60598-2-24. Fixtures used in grain and flour handling areas may therefore require the relevant limited-surface-temperature qualification in addition to food-zone certification.
• Regulatory transitions create further documentation requirements. China's GB 14881-2025 takes effect in September 2026, broadening the lighting protection requirement to exposed food and changing the compliance metric to illuminance. Fixtures designed against the previous requirements must be reassessed and their supporting documentation updated.

Trend: Hygienic-design certification and audit-ready documentation
• Food processing lighting is increasingly shifting from a focus on housing and ingress protection towards complete hygienic-design certification and documentation. Fixtures may need to combine NSF/ANSI 2 for cleanability and non-toxicity, IP69K for washdown, and IEC 60598-2-24 for dust-accumulation environments. ATEX and IECEx certification are added where hazardous-area classifications require them.
• Products such as the SATCO|NUVO IP69K UFO high bay, Led2work Inroled 50 Clean Pro with Ecolab and NSF certification, and RENO Sleek with NSF/ANSI 2 and IP69K demonstrate how suppliers combine multiple credentials in their product offerings.
• Documentation is becoming equally important. GFSI schemes require lighting risk assessments and shatter protection across food zones, making supplier-provided cutsheets, certification records, and material declarations essential to facility audit preparation.
• Consequently, competitive differentiation increasingly depends on the ability to provide a complete certification and documentation package rather than relying only on lumen output or ingress-protection ratings.

Segmentation Analysis By Product Type
• Linear Lights are widely used in production and packaging areas because their form allows continuous illumination along processing lines. Fixtures must combine suitable food-zone certification with washdown protection and shatter-resistant lenses, such as polycarbonate or coated glass.
• High-Bay Lights serve high-ceiling processing and warehousing areas. IP69K-rated UFO high bays with NSF approval can address both sanitation requirements and vertical illumination needs. The SATCO|NUVO fixture is an example of a product offering combined IP69K and NSF credentials.
• Panel Lights are used in inspection stations, quality-control benches, and lower-ceiling production rooms where uniform, diffuse illumination is important. CRI is a key specification: meat and seafood inspection may require CRI of 90 or higher, while dairy and bakery inspection commonly require CRI of at least 80.
• Bulkhead Lights serve washdown corridors, cold-storage entrances, and other areas requiring compact, sealed fixtures. IP69K-rated bulkheads with stainless steel 316 housings are suitable for environments exposed to frequent cleaning.
• Emergency Lights must meet both emergency-illumination and food-zone hygiene requirements. They should carry suitable NSF/ANSI 2 and ingress-protection credentials for the installation zone rather than relying solely on standard industrial emergency-lighting specifications.

Don't pay for what you don't need. Save 30%

Customise your report by selecting specific countries or regions

Specify Scope Now
Reecha Roy
By Lighting Technology
• LED lighting has become the preferred technology because LED fixtures produce 50 to 70 percent less heat than metal halide lighting. This can reduce refrigeration and HVAC loads in cold-storage facilities. LEDs can also maintain 95 percent output at -20°F, while fluorescent tubes may lose 30 to 40 percent of their brightness in freezer conditions.
• Fluorescent lighting remains in some existing installations and cost-sensitive dry-storage areas. However, its glass envelope and mercury content create potential contamination risks if a tube breaks. European guidance under EC Regulation 852/2004 therefore recommends diffusers or protective tubes where fluorescent lamps remain in use.
• Other Technologies occupy a limited position in legacy and specialty applications. For most food processing installations, the main technology decision concerns the LED platform, optical design, and required certification portfolio.

By Protection Rating
• Standard Industrial Fixtures are generally limited to dry storage and warehousing areas where food-zone sanitation and washdown requirements do not apply. They are unsuitable for food zones and washdown corridors where additional hygiene and ingress protection are required.
• IP-Rated Fixtures provide protection for wet and washdown environments. IP65 is commonly used in splash-exposed and general production areas, while IP66 or IP69K may be specified for more demanding washdown conditions. IP69K provides protection against 100-bar, 85°C water jets, distinguishing it from general splash-protection ratings.
• Hygienic/Sealed Fixtures combine appropriate IP protection with NSF/ANSI 2 certification, shatter-resistant lenses, smooth and crevice-free housings, and stainless steel 316 or equivalent hardware. They are designed to meet both food-safety and sanitation requirements in food-contact and splash zones.

By Application
• Processing Areas are among the most demanding applications because they combine exposed food, frequent washdown, and contamination risks. Fixtures may need to meet FDA 21 CFR 117.20(b)(5) shatter-protection requirements, NSF/ANSI 2 cleanability requirements, and IP69K washdown protection. In India, the commonly applied FSSAI benchmark is 540 lux at the working surface.
• Packaging Areas require adequate lighting for label reading, packaging inspection, and product handling. Where packaging lines are exposed to food or splashes, fixtures must meet the relevant food-zone certification requirements. Illuminance requirements depend on the specific inspection and packaging tasks.
• Cold Storage requires fixtures that maintain reliable output at low temperatures. LEDs can maintain approximately 95 percent output at -20°F, while fluorescent tubes may experience a 30 to 40 percent reduction in brightness under freezer conditions.
• Inspection and Quality-Control Areas require suitable illuminance and colour rendering for accurate product assessment. Meat and seafood inspection may require CRI of 90 or higher, while USDA FSIS inspection stations typically require 50 to 200 footcandles at CRI 90 or higher.
• Warehousing and Dry Storage are comparatively less demanding applications. Fixture selection is primarily influenced by general ingress protection, dust conditions, and the need for appropriate lighting coverage rather than the full food-zone certification portfolio.

By End-user
• Meat and Poultry Processing has demanding lighting requirements because of exposed products, frequent high-pressure washdown, and inspection requirements. Fixtures must withstand chlorine and peracetic acid exposure while maintaining the colour rendering needed for product inspection. USDA FSIS inspection requirements make CRI 90 or higher particularly important.
• Dairy Processing requires sealed fixtures in clean-in-place areas exposed to hot caustic or acidic cleaning solutions. IP69K and IP67-rated fixtures may be used depending on the application, while stainless steel 316 housings and compatible gasket materials help address corrosion risks.
• Bakery and Confectionery facilities require suitable colour rendering for browning assessment and fixtures designed for environments where flour dust can accumulate. IEC 60598-2-24 limited-surface-temperature requirements are relevant where dust accumulation creates a heat-related hazard.
• Beverage Processing combines washdown requirements with exposure to sugar and syrup residues that can attract pests. Smooth, crevice-free housings with appropriate food-equipment certification support effective cleaning.
• Seafood Processing requires high colour rendering, often CRI 90 or higher, for freshness assessment. Fixtures must also withstand IP69K washdown conditions and the corrosive effects of salt and brine exposure.
• Other Food Industries require lighting solutions based on their specific food-handling processes, sanitation chemicals, environmental conditions, and food-safety audit requirements.

Regional Analysis • North America operates under FDA 21 CFR 117.20(b)(5), which requires adequate lighting and shatter protection in food-processing areas. USDA FSIS Directive 5000.1 Revision 8, issued in January 2025, requires appropriate lighting quality and intensity, with inspection stations typically requiring 50 to 200 footcandles at CRI 90 or higher. NSF/ANSI 2 provides food-equipment certification for relevant non-food and splash-zone applications. GFSI schemes, including SQF Edition 10, BRCGS Issue 9, and FSSC 22000, also require documented lighting risk assessments and shatter protection across food zones. SQF Edition 10 was released in March 2026, with audits beginning in January 2027. The FDA Food Code recommends at least 108 lux in walk-in refrigeration, 215 lux in food preparation areas, and 540 lux where detailed work is performed. The NIST-documented Desert Gold Food Company retrofit achieved a 30 percent reduction in facility-wide electricity usage and projected annual energy-cost savings of more than $40,000.
• Europe follows EC Regulation 852/2004, Annex II, Chapter II, paragraph 7, which requires adequate natural or artificial lighting in food production and distribution premises. Luminaires above unpackaged food must be enclosed to prevent contamination in the event of breakage and to support cleaning. Supporting guidance recommends diffusers or protective tubes for fluorescent lamps, surface-mounted rather than suspended fixtures, and concealed cabling. EN 60598-2-24 applies to luminaires with limited surface temperatures in dust-accumulation environments, while ATEX and IECEx frameworks apply to relevant hazardous dust and gas zones in grain, flour, and sugar handling facilities.
• China's GB 14881-2025, effective from September 2026, expands the lighting protection requirement from "exposed food and raw materials" to "exposed food." It requires safety-type luminaires or protective measures where fixtures are installed directly above exposed food. The standard also shifts the compliance metric from general descriptions of gloss and brightness to measurable illuminance. The previous 1994 standard's 540 lux inspection and 220 lux processing values are available as references for understanding the revised standard's intent.
• India's FSSAI framework requires adequate lighting but does not specify exact lux levels in its regulation. FSSAI audits and industry benchmarks commonly apply minimum levels of 540 lux at working surfaces in food handling and processing areas and 1,080 lux in inspection and quality-control areas. Shatterproof or protected covers are required in food-contact zones. The Bureau of Indian Standards and National Building Code provide supporting electrical and egress requirements.
• Food processing facilities across the Gulf and broader Middle East operate under national food-safety regulations that may reference Codex Alimentarius principles and relevant EU or FDA frameworks, depending on the market. SASO and ESMA certification requirements apply to relevant luminaires. Investment in dairy, beverage, and meat processing facilities provides opportunities for fixtures combining NSF/ANSI 2 certification and IP69K protection, particularly where facilities supply export markets. Australia applies the Food Standards Australia New Zealand Code and AS/NZS 1680 for interior lighting. The Regulatory Compliance Mark (RCM) framework applies to the electrical portion of the product. IP69K and NSF/ANSI 2 certifications may also be used as supporting food-zone compliance evidence, particularly for facilities supplying export markets.

Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031

Aspects covered in this report
• Global Food Processing Lighting Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Product Type
• Linear Lights
• High-Bay Lights
• Panel Lights
• Bulkhead Lights
• Emergency Lights

By Lighting Technology
• LED
• Fluorescent
• Other Technologies

By Protection Rating
• Standard Industrial Fixtures
• IP-Rated Fixtures
• Hygienic/Sealed Fixtures

By Application
• Processing Areas
• Packaging Areas
• Cold Storage
• Inspection & Quality Control
• Warehousing

By End-user
• Meat & Poultry Processing
• Dairy Processing
• Bakery & Confectionery
• Beverage Processing
• Seafood Processing
• Other Food Industries

Request Table of Contents

First Name

Last Name

Company Name

Job Title

Business Email

Contact Number

Description

Food Processing Lighting Market Research FAQs

Key driver: Food-safety audits and washdown requirements increasing demand for compliant fixtures. Key challenge: Non-substitutable certifications and chemical-resistance requirements. Key trend: Hygienic-design certification and audit-ready documentation.

The report uses 2020 as the historic year, 2025 as the base year, 2026 as the estimated year, with forecasts up to 2031.

The Global Food Processing Lighting Market is analysed by product type (Linear Lights, High-Bay Lights, Panel Lights, Bulkhead Lights, Emergency Lights); lighting technology (LED, Fluorescent, Other Technologies); protection rating (Standard Industrial Fixtures, IP-Rated Fixtures, Hygienic/Sealed Fixtures); application (Processing Areas, Packaging Areas, Cold Storage, Inspection & Quality Control, Warehousing); end-user (Meat & Poultry Processing, Dairy Processing, Bakery & Confectionery, Beverage Processing, Seafood Processing, Other Food Industries).

The report covers Global.

This report is open for pre-booking. Pre-book it to receive the full report as soon as it is released. You can also request a free sample and the table of contents in the meantime.

Yes. Bonafide Research can add countries, segments or company profiles to match your requirements. Request customisation.
Logo

Global Food Processing Lighting Market Outlook, 2031

ChatGPT Summarize Gemini Summarize Perplexity AI Summarize Grok AI Summarize Claude Summarize

Contact usWe are friendly and approachable, give us a call.