Loading Bonafide Research

Global Daylight Harvesting Market Outlook, 2031

Global Daylight Harvesting Market grows as Title 24 2025 sets a 75-watt threshold and requires zones on plans.

The global daylight harvesting market is shaped by building energy codes and the ability of lighting control systems to meet their requirements. The commercial value of a sensor or controller depends not only on its sensing capability but also on the control sequence it enables and the commissioning evidence it can provide. ASHRAE 90.1-2025 expands daylight-responsive controls by requiring dimming or shutoff near windows and skylights. It also requires continuous dimming down to 10 percent of full lighting power, in addition to full ON/OFF control. This reduces the previous daylight-responsive dimming threshold from 20 percent to 10 percent, making the minimum output level an important compliance requirement. California's Title 24 2025 reduces the daylight-responsive control threshold from 120 watts to 75 watts of general lighting in primary sidelit, secondary sidelit, or skylit daylit zones. It also requires daylight zones in spaces larger than 250 square feet to be clearly identified on architectural plans. In qualifying zones, lighting power must decrease by at least 90 percent when natural light levels are high.

The European Union's revised Energy Performance of Buildings Directive (EPBD) 2024, Article 13(12), requires automatic lighting controls to be suitably zoned and capable of occupancy detection. The requirement applies to non-residential buildings above 290 kW by 31 December 2027 and above 70 kW by 31 December 2029. Its Building Automation and Control Systems (BACS) framework also includes dimming based on natural light as a lighting-control function. Together, these regulations make daylight harvesting an increasingly important part of building compliance rather than simply an optional energy-saving measure. The choice between open-loop and closed-loop control is another important factor in system performance. An open-loop photosensor detects daylight without measuring the artificial light it controls. This makes it less affected by lamp depreciation and changes in room surfaces, but it requires initial commissioning to establish the relationship between the sensor signal and the required electric light level. A closed-loop photosensor measures both daylight and artificial light in the space. It adjusts electric lighting according to the sensor signal and programmed set points. Each sensor maintains the light level for its directly connected fixture, with the objective of keeping work-surface illuminance consistent rather than maintaining a fixed ceiling light output.

What's Inside a Bonafide Research`s industry report?

A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.

Download Sample
Commissioning has a direct impact on energy savings and visual comfort. Research involving three daylight control systems in a school building found that an open-loop system with an outward-facing sensor delivered the highest savings, while a closed-loop system with a centrally positioned sensor delivered the lowest under the conditions studied. The research also found that the performance of both systems depended on their operation and initial commissioning. Sensor technology introduces additional calibration requirements. Photodiode output typically requires amplification, whereas phototransistor output may not. However, an uncorrected lux value based on a phototransistor may not be sufficiently accurate because the detected light intensity cannot be directly converted into lux without appropriate calibration. Certification and interoperability also influence product suitability. DALI-2 certification under IEC 62386-304 covers light sensors as input devices. Products such as the SITECO Licross sensor are certified under Parts 101, 103, and 304, with daylight detection for mounting heights between 4 and 12 metres. IEC 62471 and IEC/TR 62778 provide the framework for photobiological safety assessment. These standards apply to indicator LEDs in sensors and to the luminaires whose output is controlled by the sensors. Risk-group classifications, including RG0 (exempt) and RG1 (low risk), are determined through spectral and optical calculations. The DesignLights Consortium (DLC) Networked Lighting Controls technical requirements also influence market access. They treat daylight harvesting or photocell control as a required system capability alongside occupancy sensing, high-end trim, zoning, and continuous dimming. Utility programmes may link rebate eligibility to listing under the appropriate control category.

DALI-2 certification is an important product qualification factor. A light sensor certified under IEC 62386 Parts 101, 103, and 304 can report lux values to a higher-level controller in a standardised format. This allows commissioning teams to configure target illuminance and dimming curves without depending on proprietary interpretations of sensor signals. DLC Networked Lighting Controls listing provides another competitive advantage, particularly in utility-funded retrofit projects. Its technical requirements cover daylight harvesting, occupancy sensing, high-end trim, programmable zoning, and continuous dimming. Suppliers must demonstrate these capabilities as part of an integrated system rather than offering them only as separate product features. Commissioning and application-engineering capabilities further differentiate suppliers. Sensor placement relative to daylight openings and controlled luminaires, the selection of open-loop or closed-loop control, and the initial calibration of sensor signals all affect system performance. A correctly certified sensor can still underperform if it is incorrectly positioned or commissioned. The financial benefits of effective commissioning are supported by measured evidence. A GSA/LBNL study covering 13 federal building sites found that daylight harvesting could deliver 27 percent energy savings, with payback as low as four years. A separate LBNL meta-analysis covering 240 energy-savings estimates from 88 papers and case studies reported average savings of 28 percent for daylight harvesting using photosensors.

Market Dynamics Driver: Code-mandated continuous dimming and expanded daylight zones
• Building energy regulations are increasing the need for daylight harvesting systems by making daylight-responsive controls a compliance requirement. ASHRAE 90.1-2025 requires continuous dimming to 10 percent or less of full lighting power and expands daylight-responsive controls near windows and skylights.
• California's Title 24 2025 lowers the control threshold to 75 watts in qualifying daylit zones. It also requires daylight zones to be identified on architectural plans for spaces larger than 250 square feet. These provisions bring a broader range of small and medium-sized commercial spaces into the daylight-control requirement.
• In Europe, the EPBD 2024 establishes deadlines for automatic lighting controls in non-residential buildings above 290 kW by 2027 and above 70 kW by 2029. Its BACS framework also recognises dimming based on natural light. These dated compliance requirements create a clear implementation timeline for building owners and lighting system suppliers.
• Alongside regulatory requirements, the GSA/LBNL evidence of 27 percent energy savings and payback as low as four years provides building owners with a financial reason to adopt daylight harvesting systems.

Make this report your own

Have queries/questions regarding a report

Take advantage of intelligence tailored to your business objective

Reecha Roy

Reecha Roy

Research Analyst

Challenge: Commissioning variability and differences between control strategies
• Commissioning quality is a major constraint on daylight harvesting adoption. Sensors that are incorrectly positioned, calibrated, or matched to the control strategy may fail to deliver the expected energy savings, reducing the financial justification for installation.
• Research on three daylight control systems found that an open-loop system with an outward-facing sensor achieved the highest savings, while a closed-loop system with a centrally positioned sensor achieved the lowest under the conditions studied. The findings highlight the importance of initial commissioning rather than relying only on hardware specifications.
• Sensor technology also affects calibration. Photodiode output requires amplification, while phototransistor output may not. However, phototransistor-based readings may not provide sufficiently accurate lux measurements without appropriate correction.
• The DLC requirement to combine daylight harvesting with high-end trim, zoning, and continuous dimming in networked systems further increases commissioning complexity. Installers must configure the dimming curve, zoning boundaries, and high-end trim correctly to achieve the expected daylight-responsive performance.

Trend: DALI-2 certification and networked control integration
• Daylight harvesting is moving from standalone photocell switches towards DALI-2-certified light sensors connected to networked controllers. The certification focus is shifting towards standardised sensor input and reporting rather than basic switching functionality.
• DALI-2 Part 304 defines the light-sensor input device. Products such as the SITECO Licross sensor and MEAN WELL DLS-2 are certified under Parts 101, 103, and 304 and are powered directly from the DALI bus. This allows controllers to commission sensor addresses, set target illuminance, and read measured light values as standardised data points instead of relying on proprietary voltage signals.
• The DLC Networked Lighting Controls framework supports this development by treating daylight harvesting as part of an integrated system that also includes occupancy sensing, high-end trim, zoning, and energy monitoring.
• As a result, competitive value is increasingly shifting from the sensor's detection threshold to the controller's ability to configure, monitor, report, and verify daylight-responsive performance across a building.

Segmentation Analysis By Component
• Daylight Sensors form the sensing layer of daylight harvesting systems. Their main specification requirements include DALI-2 input-device certification under IEC 62386 Part 304, alongside Parts 101 and 103. Mounting height and opening angle also determine whether a sensor can effectively serve its assigned daylight zone.
• Lighting Controllers execute the daylight-responsive control sequence. They must support integrated functions such as zoning, high-end trim, and continuous dimming to meet DLC Networked Lighting Controls requirements.
• Dimmable Drivers regulate the output of lighting fixtures. Their minimum dimming capability is particularly important because ASHRAE 90.1-2025 requires continuous dimming to 10 percent or less of full lighting power. Drivers that cannot reach this level reliably without flicker or dropout may not be suitable for compliant installations.
• Lighting Fixtures provide the illumination controlled by the system. Their light distribution, together with sensor placement relative to windows and skylights, affects whether the system measures work-surface illuminance or relies on a ceiling-plane measurement that may not represent actual occupant lighting conditions.
• Software supports commissioning, monitoring, and performance verification. Its reporting capabilities help demonstrate system performance during utility programme reviews and measurement and verification processes.

Don't pay for what you don't need. Save 30%

Customise your report by selecting specific countries or regions

Specify Scope Now
Reecha Roy
By Control Strategy
• Open-Loop Control uses a photosensor positioned to detect daylight without measuring the artificial light controlled by the system. It is less affected by lamp depreciation and changes in room surfaces but depends on accurate commissioning to establish the relationship between measured daylight and required electric light output.
• Closed-Loop Control uses a photosensor that measures both natural daylight and artificial light from the controlled system. This allows the controller to adjust lighting in response to changing room conditions and lamp lumen depreciation. However, it requires a stable feedback algorithm and careful commissioning to prevent control oscillation. Each sensor maintains the light level for its directly connected fixture, with the objective of keeping work-surface illuminance consistent.
• The selection of a control strategy determines sensor placement, calibration methods, and commissioning documentation required for compliance with ASHRAE, Title 24, and EPBD provisions.

By Lighting Integration
• Standalone Systems use a photocell or daylight sensor to switch or dim a dedicated lighting circuit without connecting it to a wider lighting control network. They generally offer a lower-cost configuration but have limited integration capabilities.
• Integrated Lighting Control Systems combine daylight harvesting with occupancy sensing, scheduling, high-end trim, and zoning through a networked architecture. These capabilities align with the DLC Networked Lighting Controls framework. Standalone sensors may not qualify for the relevant rebate category unless they form part of a listed system.

By Application
• Commercial Buildings represent a major application area because ASHRAE 90.1-2025, California Title 24 2025, and the EPBD 2024 establish daylight-responsive lighting requirements for applicable commercial spaces, including offices, retail facilities, and mixed-use buildings. The DLC Networked Lighting Controls framework also supports commercial retrofit and new-construction projects.
• Residential Buildings are covered by relevant EPBD residential provisions and applicable Title 24 dwelling-unit requirements. However, daylight harvesting requirements are less prescriptive in residential spaces than in commercial buildings.
• Industrial Facilities use daylight harvesting in warehouses and production areas where skylights and high-bay lighting can create opportunities to reduce artificial lighting consumption. The DLC's expansion of networked lighting controls to industrial spaces also supports this application.
• Institutional Buildings, including schools and hospitals, are influenced by building energy-code requirements. India's ECBC 2017 specifically requires photosensor-based dimming in perimeter zones within 4.5 metres of windows, applying to buildings above the 100 kW connected-load threshold.

By End-user
• Offices are an important end-user segment because the GSA/LBNL energy-savings evidence and DLC Networked Lighting Controls framework are particularly relevant to office buildings. The GSA/LBNL study documented 27 percent energy savings, with payback as low as four years, across the assessed federal building sites.
• Retail Facilities use daylight harvesting to reduce lighting energy consumption in naturally lit sales areas while maintaining the required merchandise illuminance. California's Title 24 75-watt threshold also brings smaller qualifying retail spaces into the daylight-responsive control requirement.
• Educational Institutions use daylight harvesting in classrooms and other learning spaces. India's ECBC perimeter-zone requirement and research comparing open-loop and closed-loop daylight control systems in schools are relevant to lighting design in this segment.
• Healthcare Facilities apply daylight harvesting in patient rooms, corridors, and administrative areas. Control systems must account for clinical lighting requirements and ensure that illuminance does not fall below the required task level when natural daylight changes.
• Industrial Facilities use daylight harvesting in warehouses and production areas. The DLC Networked Lighting Controls framework's expansion to industrial spaces and the ASHRAE 90.1-2025 continuous-dimming requirement support the adoption of integrated lighting controls in these environments.

Regional Analysis • North America is influenced by ASHRAE 90.1-2025, which requires continuous dimming to 10 percent or less of full lighting power and expands daylight-responsive controls to include dimming or shutoff near windows and skylights. California's Title 24 2025 lowers the daylight-responsive control threshold to 75 watts in qualifying daylit zones. It also requires daylight zones to be identified on plans for spaces larger than 250 square feet and requires at least a 90 percent reduction in lighting power when daylight levels are high in qualifying zones. The DLC Networked Lighting Controls technical requirements include daylight harvesting or photocell control alongside occupancy sensing, high-end trim, zoning, and continuous dimming. Utility programmes also link rebate eligibility to listing under the appropriate category.
• Europe follows the revised EPBD 2024, Article 13(12), which requires automatic lighting controls to be suitably zoned and capable of occupancy detection. The requirement applies to non-residential buildings above 290 kW by 31 December 2027 and above 70 kW by 31 December 2029. The directive's BACS framework also includes dimming based on natural light, supporting the integration of daylight harvesting into building automation and energy-efficiency systems.
• China's GB 55015-2021, Clause 3.3.9, requires buildings with natural daylight to adopt energy-saving control measures based on daylight conditions and building use. These measures may include zonal, grouped, illuminance-based, or time-based controls. The clause interpretation highlights the importance of using natural light while maintaining normal building operations. Stairwells and corridors are required to use illuminance sensing or time-schedule controls to supplement artificial lighting automatically and avoid unnecessary lighting when daylight is sufficient.
• India's ECBC 2017 applies to commercial buildings with a connected load of 100 kW or above. It requires perimeter zones within 4.5 metres of windows to use photosensor-based dimming. The code's daylight requirement is expressed through the Useful Daylight Illuminance framework rather than through a standalone sensor mandate.
• Australia's AS/NZS 1680.1 provides guidance on integrating natural lighting with lighting controls, including daylight sensor control and dimmable lamps. The National Construction Code's Section J provisions allow daylight and movement sensors to contribute to the lighting-energy compliance pathway.
• Saudi Arabia's SASO certification framework applies to lighting fixtures and control devices placed on the market. The SAPS 1400 standard provides guidelines for smart-building design and operation, including automation technologies for energy efficiency. Giga-project specifications also require DALI- or Zhaga-compatible control interfaces for smart-city integration.
• Brazil's INMETRO INI-C Normative Instruction under Portaria 309/2022 incorporates daylight contribution and local internal control criteria into building energy-efficiency assessments. This creates a conformity framework that recognises documented daylight-responsive lighting controls.

Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031

Aspects covered in this report
• Global Daylight Harvesting Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Component
• Daylight Sensors
• Lighting Controllers
• Dimmable Drivers
• Lighting Fixtures
• Software

By Control Strategy
• Open-Loop Control
• Closed-Loop Control

By Lighting Integration
• Standalone Systems
• Integrated Lighting Control Systems

By Application
• Commercial Buildings
• Residential Buildings
• Industrial Facilities
• Institutional Buildings

By End-user
• Offices
• Retail Facilities
• Educational Institutions
• Healthcare Facilities
• Industrial Facilities

Request Table of Contents

First Name

Last Name

Company Name

Job Title

Business Email

Contact Number

Description

Daylight Harvesting Market Research FAQs

Key driver: Code-mandated continuous dimming and expanded daylight zones. Key challenge: Commissioning variability and differences between control strategies. Key trend: DALI-2 certification and networked control integration.

The report uses 2020 as the historic year, 2025 as the base year, 2026 as the estimated year, with forecasts up to 2031.

The Global Daylight Harvesting Market is analysed by component (Daylight Sensors, Lighting Controllers, Dimmable Drivers, Lighting Fixtures, Software); control strategy (Open-Loop Control, Closed-Loop Control); lighting integration (Standalone Systems, Integrated Lighting Control Systems); application (Commercial Buildings, Residential Buildings, Industrial Facilities, Institutional Buildings); end-user (Offices, Retail Facilities, Educational Institutions, Healthcare Facilities, Industrial Facilities).

The report covers Global.

This report is open for pre-booking. Pre-book it to receive the full report as soon as it is released. You can also request a free sample and the table of contents in the meantime.

Yes. Bonafide Research can add countries, segments or company profiles to match your requirements. Request customisation.
Logo

Global Daylight Harvesting Market Outlook, 2031

ChatGPT Summarize Gemini Summarize Perplexity AI Summarize Grok AI Summarize Claude Summarize

Contact usWe are friendly and approachable, give us a call.