If you purchase this report now and we update it in next 100 days, get it free!
The global color measurement lighting market is a specialised metrology market in which lighting equipment is used to evaluate colour consistency and appearance under standardised illumination conditions. The commercial value of a light booth depends on its ability to reproduce specified illuminants, illuminance levels and viewing geometry within measurable tolerances. ISO 3668:2017, the standard for visual comparison of paints and varnishes, specifies artificial illumination using a colour-matching booth with CIE Standard Illuminant D65 at a correlated colour temperature of 6,504 K. The required illuminance ranges from 1,000 to 4,000 lux, depending on the booth model. Lighting must be diffuse and uniform, without reflections from the light source on the sample surface. The booth's interior walls should have a matte neutral-grey finish, typically Munsell N7, to minimise the influence of surrounding colours and external light. The third edition introduced CIE illuminant FL11 as an additional artificial light source and retained metamerism assessment as a normative procedure. Annex A provides the colour-difference rating scheme, while Annex B addresses metameric matches.
ASTM D1729-22 provides complementary requirements for the visual appraisal of colours and colour differences in diffusely illuminated opaque materials. It recommends simulated average daylight D65 for general industrial colour evaluation, while D50 is recommended for applications involving colour photography and printing under ISO 3664:2009. The standard requires observers to have at least normal colour vision, with superior colour vision preferred as assessed through the FM-100 Hue Test under Guide E1499. It excludes critical appraisal of metallic and pearlescent paints, which require illumination that closely simulates direct sunlight geometrically. Graphic arts follow ISO 3664:2009, which specifies CIE illuminant D50 at 2,000 ± 500 lux, with a preferred tolerance of 2,000 ± 200 lux, for critical comparison of prints. The standard also establishes a chromaticity tolerance within a 0.05-unit radius circle on the CIE 1976 UCS diagram and includes a colour fidelity index to address developments in lighting technology. D65-based booths used for paint assessment cannot automatically replace D50 booths in graphic arts because the reference illuminant, illuminance and UV characteristics differ. National and industry-specific standards add further requirements. China's GB/T 32387-2015 specifies the structure, technical requirements, test methods, inspection rules and marking for general-purpose colorimetric boxes. FZ/T 98018-2018 and GB/T 2374-2017 establish a D65 illuminance requirement of at least 600 lux on the observation surface, alongside uniformity requirements for applications including textiles, paints, plastics and furniture.
What's Inside a Bonafide Research`s industry report?
A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.
India's IS 11472 (Part 1):1985, reaffirmed in 2018, specifies daylight-representative illuminants and tolerances for chromaticity and spectral distribution. IS 11472 Part 2 addresses viewing conditions for the graphic arts industry. The Indian standard specifies illumination between 1,000 and 4,000 lux at the colour-matching position, with the higher level desirable for dark colours. The textile industry uses AATCC Evaluation Procedure 9, which specifies acceptable illuminants, colour temperature, illumination at the sample plane and neutral-grey surroundings. Its 2017 revision changed Option A to Option C. Automotive colour appraisal follows SAE J361, which covers vehicle parts and materials intended to match specified colours and requires a suitable fixture providing daylight, fluorescent and horizon lighting conditions. Calibration and certification are essential to maintaining measurement accuracy. X-Rite's field service documentation states that ISO standards require instruments to be certified annually. Its service uses a NIST-calibrated and traceable spectroradiometer for the initial "as found" assessment, a NIST-traceable six-tile BCRA set and an ISO/IEC 17025- and A2LA-accredited calibration process to issue the final "as left" certificate of performance and NIST label.
Datacolor's verification guidance indicates that most standards recommend light-booth maintenance at least once every 12 months, while certain OEMs require maintenance at 2,000 operating hours or less for halogen lamps. FograCert provides audit-based certification for colour measurement lighting. Its ISO 3664:2009 certification assesses colour rendition, general and special colour rendering indices, visible-range metamerism index (MIvis), UV-range metamerism index (MIuv), D50 colour accuracy, homogeneity, ambient conditions and maintenance. Its ISO 3668:2017 and ASTM D1729 certification covers standard light booths using D65, A or FL11 illumination. Maintaining current calibration and certification records is therefore important for suppliers serving quality-controlled industries and organisations subject to IATF 16949 or ISO 13485 audits.
Datacolor's ColorMatcher series supports AATCC Procedure #9, AS 1580.6001.1, ASTM D1729, BS 950/2, ISO 3668, SAE J361 and TAPPI T515. It also provides a NIST-traceable certificate of product conformance, allowing the equipment to serve different industrial colour-evaluation applications. X-Rite's SpectraLight QC and Judge LED booths comply with ISO 3664, ISO 3668, ISO 13076 and ISO 23603, alongside AATCC EP9, ASTM D1729, SAE J361 and CIE S012/E. The Judge LED offers seven LED light sources, including directional D65 for surface inspection, orange-peel evaluation and defect detection. BYK-Gardner offers light booths and luminaires with seven certified illuminants: D65, A, Hz, CWF, TL84, U30 and UV. These configurations support coatings and plastics applications where different viewing conditions are required. Spectral performance is an important differentiator in the transition from fluorescent to LED simulators. JUST Normlicht's LED v8 visual assessment cabinet achieves a CRI between 90 and 100 and a metamerism index below 1. Its daylight 6500 proIndustry lamps also meet demanding colour-matching requirements at a standard illuminance of 2,000 lux. However, high CRI alone does not guarantee accurate daylight simulation. CIE's assessment method uses the visible-range metamerism index calculated from five non-fluorescent metameric sample pairs. FograCert's certification of the WeSpectra SpectraTune LED Light Booth to ISO 3668 and ASTM D1729 demonstrates that LED simulators can meet industrial certification requirements, with MIvis and MIuv serving as important evaluation parameters alongside colour rendering. Calibration and after-sales support provide another competitive advantage. X-Rite offers on-site calibration using NIST-traceable equipment and provides "as found" and "as left" performance documentation. Datacolor's Certify Program requires light booths to be covered by annual service arrangements, with performance, operating conditions and usage evaluated against programme requirements.
Make this report your own
Have queries/questions regarding a report
Take advantage of intelligence tailored to your business objective
Reecha Roy
Research Analyst
Market DynamicsDriver: Quality-system audits and supply-chain colour consistency requirements • Colour measurement booths are increasingly treated as calibrated inspection instruments within industrial quality-management systems. Manufacturers use them to make accept-or-reject decisions during incoming material inspection, production quality control and final product assessment. • Industries operating under ISO 9001, IATF 16949 and ISO 13485 require measurement equipment to maintain documented calibration and verification records. X-Rite's service documentation identifies annual certification requirements, while Datacolor recommends maintenance at least every 12 months for most applications, with shorter intervals for certain halogen-based systems. • FograCert certification provides supporting evidence covering colour rendition, MIvis, MIuv, D50 accuracy, homogeneity and maintenance. These requirements create recurring demand for calibration, verification and certification services beyond the initial equipment purchase.
Challenge: LED metamerism performance and fragmented industry standards • The transition to LED technology has improved energy efficiency and lamp life but has created challenges in reproducing the metamerism performance associated with traditional fluorescent simulators. A high CRI does not necessarily indicate accurate spectral simulation because CRI measures colour rendering against a reference illuminant rather than directly assessing spectral matching. • FograCert evaluates MIvis and MIuv separately. An LED booth with CRI above 90 but MIvis above 1 may fail the specified ISO 3664 certification criteria. • Industry-specific standards further complicate market access. ISO 3668 uses D65 at 1,000–4,000 lux, ISO 3664 uses D50 at 2,000 ± 500 lux, AATCC EP9 defines textile-specific viewing conditions, and SAE J361 requires daylight, fluorescent and horizon lighting. Manufacturers serving multiple industries must therefore maintain separate compliance documentation and calibration arrangements for the applicable standards.
Trend: Multi-illuminant LED booths and digital colour comparison • Colour measurement lighting is moving towards multi-illuminant LED cabinets that combine several light sources with digital verification and reporting features. This allows manufacturers to reproduce different viewing conditions within a single booth and evaluate metameric differences more consistently. • Datacolor's ColorMatcher offers multiple fluorescent and LED light sources, configurable light-source sequencing, a 45-degree viewing table and usage monitoring to alert operators when light sources require replacement. • X-Rite's Judge LED provides seven LED light sources and an optional integrated calibrated monitor for comparing physical samples with digital material references. This extends the booth's function beyond conventional visual appraisal into digital colour communication. • BYK-Gardner's multi-illuminant configuration and FograCert's certification of LED booths to ISO 3668 and ASTM D1729 further demonstrate the industry's movement towards flexible spectral simulation and documented performance.
Don't pay for what you don't need. Save 30%
Customise your report by selecting specific countries or regions
Segmentation AnalysisBy Product Type • Standard Light Booths are the core product category because they provide the controlled viewing environment required by ISO 3668 and ASTM D1729. They typically provide 1,000–4,000 lux, matte neutral-grey Munsell N7 interior walls and diffuse, uniform illumination without source reflections. Datacolor ColorMatcher and X-Rite SpectraLight QC are representative products offering multi-standard compliance. • Multi-Light-Source Booths allow users to assess colour under different illuminants and identify metameric mismatches. They are widely used in supply chains requiring comparisons under D65 and additional illuminants. BYK-Gardner's booth, with seven certified sources including D65, A, Hz, CWF, TL84, U30 and UV, illustrates this product category. • Spectral Simulation Lighting Systems provide tunable-spectrum capabilities to reproduce specified illuminants. They are used where the required spectral power distribution differs from standard CIE illuminants or where a measured reference spectrum must be replicated. • Colour Assessment Fixtures include overhead luminaires and viewing cabinets used for inspecting large or assembled products that cannot be placed inside standard bench-top booths. X-Rite's SpectraLight QC and Judge LED serve applications requiring colour assessment of assembled goods.
By Light Source • LED is increasingly used in new colour measurement lighting systems because it can reproduce multiple illuminants, including D65, D50, A, TL84, CWF and UV, through a single lighting array. JUST Normlicht's LED v8 cabinet achieves a CRI of 90–100 and a metamerism index below 1 at 2,000 lux, demonstrating the performance available in advanced LED systems. • Fluorescent sources remain relevant because traditional standards were developed around fluorescent daylight simulators. JUST Normlicht's daylight 6500 proIndustry fluorescent tube continues to serve as a D65 source meeting the ISO 3668 quality class BC requirement. • Incandescent sources provide CIE illuminant A, which is used alongside D65 for metamerism assessment. Switching between daylight and tungsten illumination helps identify colour matches that change under different lighting conditions. • Other Light Sources include UV and horizon lamps required by certain industry-specific applications and viewing standards. Their inclusion depends on the number and configuration of illuminant channels supported by the booth.
By Light Standard • D65 is the principal illuminant for industrial colour evaluation. ISO 3668 specifies D65 at 6,504 K for routine paint and varnish comparisons, while ASTM D1729 recommends simulated average daylight D65 for general industrial colour appraisal. China's FZ/T 98018-2018 and GB/T 2374-2017 establish a minimum observation-surface illuminance of 600 lux for relevant textile, paint and plastics applications. • D50 is used in graphic arts and printing. ISO 3664:2009 specifies D50 at 2,000 ± 500 lux and establishes a chromaticity tolerance of 0.05 units on the CIE 1976 UCS diagram. D65-based paint assessment booths cannot automatically replace D50 systems used for print proofing. • Illuminant A represents incandescent or tungsten lighting and is used to identify metameric differences when samples are compared under daylight and artificial light. • TL84 represents tri-phosphor fluorescent commercial lighting commonly associated with European and Asian retail environments. It is included in multi-illuminant booths used by suppliers serving these markets. • Other Standard Illuminants include FL11, CWF, U30 and UV, depending on industry requirements and customer specifications.
By Application • Textile and Apparel is a major application because AATCC EP9 establishes viewing conditions for visual shade matching, including illuminants, sample-plane illumination and neutral-grey surroundings. China's FZ/T 98018-2018 also specifies D65 illuminance of at least 600 lux on the observation surface. • Paints and Coatings use ISO 3668, which requires D65 illumination at 1,000–4,000 lux and includes metamerism assessment. Paint laboratories require booths that meet the applicable standard rather than relying on generic D65 product claims. • Automotive applications follow SAE J361 for evaluating the colour match of interior and exterior vehicle parts and materials. The viewing fixture must provide daylight, fluorescent and horizon lighting conditions. • Printing and Packaging use ISO 3664:2009, which specifies D50 at 2,000 ± 500 lux and includes P3 and P4 viewing conditions. D65 paint-assessment booths are not substitutes for D50 graphic-arts systems. • Plastics and Consumer Goods use ASTM D1729 and ISO 3668 for visual evaluation of diffusely illuminated opaque materials. The requirements depend on sample geometry and the relevant viewing arrangements, including 0°/45° or 45°/0° configurations under ISO 3668.
By End-user • Manufacturers represent a major end-user group because incoming inspection, production assessment and final quality control require reproducible colour comparisons. Paint, textile, plastics and automotive suppliers use booths certified to customer-specific standards and maintained according to audit requirements. • Testing Laboratories require comprehensive certification and calibration documentation. ISO/IEC 17025-accredited laboratories must demonstrate that their colour-evaluation equipment is calibrated and that observers meet the relevant colour-vision screening requirements, including FM-100 Hue assessment where applicable. • Research Institutions use colour measurement lighting for spectral analysis, colour science and observer studies. These applications may require tunable-spectrum systems rather than conventional fixed-illuminant booths. • Quality Control Facilities use booths as production inspection instruments. Recalibration intervals and usage monitoring are important because changes in light-source performance can affect the consistency of acceptance and rejection decisions.
Regional Analysis • Europe follows ISO 3668:2017 for paints and varnishes and ISO 3664:2009 for graphic arts. National standards and historical equivalents include DIN EN ISO 3668, BS 950 Part 2 and DIN 6173 Part 2. FograCert provides audit certification for ISO 3664 and ISO 3668/ASTM D1729 booths. The market is strongly influenced by quality-system audits in printing and coatings supply chains. FograCert certification provides evidence of compliance with colour rendition, metamerism, homogeneity and maintenance requirements. • North America follows ASTM D1729-22 for the visual appraisal of diffusely illuminated opaque materials, with D65 recommended for general industrial applications and D50 for colour photography and printing. Other relevant standards include AATCC EP9 for textiles, SAE J361 for automotive trim and ISO 3664 for graphic arts. NIST-traceable calibration and ISO/IEC 17025 accreditation are important for demonstrating measurement accuracy and maintaining compliance with customer quality systems. • China follows GB/T 32387-2015 for general-purpose colorimetric boxes, alongside FZ/T 98018-2018 and GB/T 2374-2017 for relevant textile, paint and plastics applications. These standards establish a D65 observation-surface illuminance requirement of at least 600 lux, alongside uniformity requirements. Domestic suppliers such as 3nh and TILO serve the market alongside international manufacturers, with product compliance assessed against applicable Chinese standards. • India follows IS 11472 (Part 1):1985, reaffirmed in 2018, which specifies daylight-representative illuminants and tolerances for chromaticity and spectral distribution. IS 11472 Part 2 covers viewing conditions for the graphic arts industry. The illumination requirement at the colour-matching position ranges from 1,000 to 4,000 lux. • Japan and the wider Asia-Pacific region use JIS Z 8724 and the CIE illuminant framework alongside relevant ISO and ASTM standards. Electronics and automotive supply chains are important demand channels for multi-illuminant LED booths used in colour inspection and quality control. • The Gulf and broader Middle East primarily follow buyer-specified requirements referencing ISO 3668, ASTM D1729 and AATCC EP9. Certification typically relies on documentation from international manufacturers rather than a single regional national standard. Textile and consumer-goods suppliers require booths with calibration certificates that meet their global customers' quality-system requirements.
Considered in this report • Historic Year: 2020 • Base year: 2025 • Estimated year: 2026 • Forecast year: 2031
Aspects covered in this report • Global Color Measurement Lighting Market with its value and forecast along with its segments • Various drivers and challenges • On-going trends and developments • Top profiled companies • Strategic recommendation
By Product Type • Standard Light Booths • Multi-Light-Source Booths • Spectral Simulation Lighting Systems • Colour Assessment Fixtures
By Light Source • LED • Fluorescent • Incandescent • Other Light Sources
By Light Standard • D65 • D50 • A • TL84 • Other Standard Illuminants
By End-user • Manufacturers • Testing Laboratories • Research Institutions • Quality Control Facilities
Request Table of Contents
Color Measurement Lighting Market Research FAQs
Key driver: Quality-system audits and supply-chain colour consistency requirements. Key challenge: LED metamerism performance and fragmented industry standards. Key trend: Multi-illuminant LED booths and digital colour comparison.
The report uses 2020 as the historic year, 2025 as the base year, 2026 as the estimated year, with forecasts up to 2031.
The Global Color Measurement Lighting Market is analysed by product type (Standard Light Booths, Multi-Light-Source Booths, Spectral Simulation Lighting Systems, Colour Assessment Fixtures); light source (LED, Fluorescent, Incandescent, Other Light Sources); light standard (D65, D50, A, TL84, Other Standard Illuminants); application (Textile & Apparel, Paints & Coatings, Automotive, Printing & Packaging, Plastics, Consumer Goods); end-user (Manufacturers, Testing Laboratories, Research Institutions, Quality Control Facilities).
The report covers Global.
This report is open for pre-booking. Pre-book it to receive the full report as soon as it is released. You can also request a free sample and the table of contents in the meantime.
Yes. Bonafide Research can add countries, segments or company profiles to match your requirements. Request customisation.
One individual can access, store, display, or archive the report in Excel format but cannot print, copy, or share it. Use is confidential and internal only. License information
One individual can access, store, display, or archive the report in PDF format but cannot print, copy, or share it. Use is confidential and internal only. License information
Up to 10 employees in one region can store, display, duplicate, and archive the report for internal use. Use is confidential and printable. License information
All employees globally can access, print, copy, and cite data externally (with attribution to Bonafide Research). License information