Loading Bonafide Research

Global Battery-Operated Lights Market Outlook, 2031

Global Battery-Operated Lights Market grows as European battery removability rules apply from February 2027.

The global battery-operated lights market is shaped by different certification requirements depending on whether products are designed for general consumer use, hazardous industrial environments, emergency applications or decorative purposes. In North America, UL 1576, harmonised with CSA C22.2 No. 250.5, is the primary safety standard for battery-powered flashlights and lanterns operating at a maximum of 75 V d.c. The 2022 edition, including its revision dated 16 December 2024, covers cordless products, line-voltage-plus-battery products, automatic lights activated during power failures and USB-charged torches. It also establishes requirements for charging cables, including length and flammability constraints. UL 1576 excludes emergency lighting covered by UL 924 and CSA C22.2 No. 141, as well as hazardous-location products. Consequently, portable lights intended for classified industrial environments require UL 783 certification. UL 783 Edition 7, published on 10 February 2025, covers battery-operated flashlights and lanterns used in Class I, Division 1, Groups A through D hazardous locations. Emergency lighting follows a separate framework under UL 924, with NFPA 101 establishing illumination and testing requirements, including a 90-minute emergency operating period. European regulations increasingly address battery construction and replaceability alongside luminaire safety. EN IEC 60598-1:2024 introduced Annex W for battery- and electric double-layer capacitor (EDLC)-supplied luminaires, addressing charging circuits, cell protection and thermal behaviour. The standard's publication date is 31 December 2025. The EU Battery Regulation 2023/1542 introduces a further design requirement from 18 February 2027, requiring portable batteries incorporated into products to be readily removable and replaceable by end users using commercially available tools, subject to limited justified exceptions.

The EU General Product Safety Regulation also covers battery-powered products below 50 V that fall outside the Low Voltage Directive. A July 2025 Safety Gate alert concerning excessive lead in the solder of a battery-operated decorative LED light string demonstrates the application of market-surveillance requirements to decorative lighting products. In China, CCC certification for lithium-ion batteries and battery packs under GB 31241-2022 became mandatory on 1 August 2024 for covered portable electronic products weighing no more than 18 kg. The implementation rules were updated through CNCA-C09-02:2025, effective 15 August 2025, with a 950°C-resistant steel engraving requirement for cell-to-product traceability from 1 November 2025. India's Flashlight (Quality Control) Order, 2025, published on 21 January 2025, makes IS 2083:2024 mandatory for flashlights sold in the country with the BIS Standard Mark. The compliance deadlines vary by enterprise size: 21 July 2025 for medium and large enterprises, 21 October 2025 for small enterprises and 21 January 2026 for micro enterprises. Competition in the battery-operated lights market depends on manufacturers' ability to obtain approvals across consumer, emergency, industrial and battery-specific regulatory frameworks. These certification routes are not interchangeable. General-purpose flashlights certified under UL 1576 cannot automatically be used in hazardous locations without UL 783 certification, while emergency lighting must follow UL 924 rather than the general-purpose flashlight standard. Emergency-light manufacturers must also demonstrate compliance with NFPA 101 performance and testing requirements. Emergency illumination must provide an average of one foot-candle at floor level at the beginning of the emergency period and maintain at least 0.6 foot-candle averaged over the route after 90 minutes. The maintenance schedule includes monthly 30-second activation checks and an annual 90-minute discharge test.

What's Inside a Bonafide Research`s industry report?

A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.

Download Sample
Battery engineering has become another important competitive differentiator. The EU Battery Regulation's removability requirement from February 2027 will require manufacturers to reconsider sealed, glued and ultrasonically welded product housings. Any claimed exception, including those associated with waterproof designs, must be justified and documented. China's CNCA-C09-02:2025 traceability requirement also increases the importance of upstream cell documentation, as manufacturers must establish traceability from individual cells to finished products. Cell-level safety is supported by IEC 62133-2, which establishes safety requirements for portable sealed lithium cells and batteries. Product recalls further highlight the importance of battery design and accessibility. In August 2025, the CPSC announced recalls involving lightweight flashlights and mini laser pens containing accessible button cells. Separate recalls involving Coleman CTAC lithium-ion flashlights and Pelican 9410L rechargeable lights highlight thermal-runaway risks in higher-power products. Connected lighting introduces additional requirements in the United Kingdom through the Product Security and Telecommunications Infrastructure (PSTI) regime. Connectable battery lights within the scope of the 2023 Regulations must meet applicable product-security requirements, including restrictions on default guessable passwords. These developments increase competitive barriers across certification, battery engineering, supply-chain documentation and connected-product security.

Market Dynamics Driver: Battery-level regulation and emergency-preparedness demand
• Battery safety and design requirements are increasingly creating product redesign and replacement demand independently of conventional luminaire replacement cycles. The EU Battery Regulation 2023/1542 requires covered portable batteries integrated into products to be removable and replaceable by end users from 18 February 2027. This requirement will affect manufacturers, importers and distributors placing products with integrated portable batteries on the EU market.
• China's mandatory CCC certification under GB 31241-2022 and the subsequent CNCA-C09-02:2025 traceability requirements are also increasing the need for documented battery supply chains and compliant product designs.
• Emergency-preparedness applications provide an additional source of recurring demand. NFPA 101 establishes a 90-minute emergency operating requirement and periodic testing obligations for emergency lighting systems. OSHA 29 CFR 1915.82 also requires suitable portable emergency lighting, including flashlights and light sticks, in shipyard employment areas where permanent or temporary lighting is unavailable. These requirements support demand for compliant portable lighting equipment and replacement batteries.

Challenge: Non-interchangeable certification routes and battery-accessibility enforcement
• Manufacturers face different certification requirements depending on the intended application. A general-purpose flashlight certified under UL 1576 cannot be substituted for a UL 924 emergency-lighting product or a UL 783 hazardous-location light without the relevant testing and approval. This limits product interchangeability and increases the cost of developing multiple product variants.
• Button-cell accessibility presents another challenge, particularly for small decorative and novelty lighting products. CPSC recalls involving Party Favors lightweight flashlights and mini laser pens in August 2025 demonstrate the consequences of accessible pre-installed button cells. Manufacturers must therefore address battery-compartment design and child-accessibility risks during product development.
• The EU General Product Safety Regulation adds further product-safety and documentation responsibilities for battery-powered products below 50 V. The July 2025 Safety Gate alert concerning excessive lead in solder used in a decorative LED light string also highlights the importance of material compliance alongside battery safety.

Make this report your own

Have queries/questions regarding a report

Take advantage of intelligence tailored to your business objective

Reecha Roy

Reecha Roy

Research Analyst

Trend: Cell traceability and user-replaceability reshaping product architecture
• Battery-operated light manufacturers are gradually moving towards product designs that support battery replacement and stronger supply-chain traceability. The EU Battery Regulation's removability requirement encourages mechanically accessible battery compartments instead of permanently sealed constructions. Commission guidance C(2025)214 further explains the criteria for easy removability, acceptable tools, supporting evidence and documentation for claimed exceptions.
• China's CNCA-C09-02:2025 introduces additional traceability requirements through 950°C-resistant steel engraving from 1 November 2025. This increases the need for manufacturers to maintain information on cell manufacturers and production lots rather than relying only on battery-pack supplier details.
• Connected lighting is also becoming subject to stronger cybersecurity requirements. The UK PSTI regime requires relevant connectable products to meet security requirements, including restrictions on default guessable usernames and passwords. Together, these developments are shifting product differentiation towards serviceable battery construction, traceable components and connected-product security.

Segmentation Analysis By Product Type
• Flashlights represent a major product category and are subject to UL 1576 requirements for general-purpose products in North America, UL 783 for hazardous-location applications and India's IS 2083:2024 requirements under the Flashlight Quality Control Order. The Indian compliance schedule varies according to enterprise size, with the final stated deadline falling on 21 January 2026 for micro enterprises.
• Lanterns follow a similar certification framework to general-purpose flashlights under UL 1576, including the 75 V d.c. limit. Products intended for hazardous industrial environments require the separate UL 783 certification route.
• Portable work lights are used in industrial, maintenance and shipyard environments. OSHA 29 CFR 1915.82 requires suitable portable or emergency lighting in shipyard spaces where fixed lighting is unavailable. General industry and construction lighting provisions also establish minimum illumination requirements that influence work-light selection.
• Decorative battery lights include string lights and other portable decorative products. In Europe, EN IEC 60598-1:2024 Annex W addresses battery- and EDLC-supplied luminaires, while the EU General Product Safety Regulation applies to relevant products outside the Low Voltage Directive. The July 2025 Safety Gate alert concerning excessive lead in decorative LED light string solder highlights the importance of material safety in this category.
• Emergency lights follow a separate certification and performance framework under UL 924 and NFPA 101. Their requirements include a 90-minute operating duration, specified illumination levels and periodic testing, distinguishing them from general-purpose consumer flashlights and lanterns.

By Battery Type
• Alkaline batteries are widely used in primary non-rechargeable flashlights and lanterns. These batteries provide a practical solution for products that require long storage life and do not depend on charging infrastructure. Their use is covered within the general-purpose primary-battery scope of UL 1576.
• Lithium-ion batteries are important in rechargeable lighting products because of their energy density and suitability for higher-power applications. They also face greater regulatory attention, including China's CCC certification under GB 31241-2022 and safety requirements under IEC 62133-2. CPSC recalls involving Coleman CTAC and Pelican 9410L lithium-ion rechargeable lights highlight thermal-runaway concerns.
• Nickel-metal hydride batteries serve rechargeable applications where lithium-ion's energy density may not be essential. They offer an alternative rechargeable chemistry, although the EU Battery Regulation's removability requirements apply to covered portable batteries regardless of chemistry.
• Other battery types include sealed lead-acid batteries used in certain larger emergency-lighting products and button cells found in small decorative or novelty lights. Button-cell products require particular attention to accessibility, as inadequate battery-compartment protection has resulted in CPSC recalls.

Don't pay for what you don't need. Save 30%

Customise your report by selecting specific countries or regions

Specify Scope Now
Reecha Roy
By Rechargeability
• Rechargeable battery-operated lights are gaining relevance as USB charging becomes increasingly common in consumer flashlights and lanterns. The UL 1576 revision dated 16 December 2024 addresses USB-charged products, including a 3.05 m cable-length limit and VW-1 or FT-1 flammability requirements for charging leads. Rechargeable products also require appropriate charging-circuit, cell-protection and thermal-safety considerations under EN IEC 60598-1:2024 Annex W and applicable battery standards.
• Non-rechargeable products continue to serve emergency-preparedness, outdoor and recreational applications where long shelf life and independence from charging infrastructure are important. Primary-battery designs also avoid the charging-circuit requirements associated with rechargeable products.

By Application
• Residential applications include flashlights, lanterns and decorative battery-operated lights. These products are primarily influenced by consumer product-safety requirements, including UL 1576 in North America and the EU General Product Safety Regulation for relevant products.
• Commercial applications include portable work lights and emergency lighting used in retail, hospitality and facility maintenance. Emergency installations follow UL 924 and NFPA 101 requirements, while general-purpose portable lights are assessed under their applicable product standards.
• Industrial applications require portable lighting suitable for demanding operating environments. Hazardous-location flashlights and lanterns must follow UL 783 in the relevant North American markets. OSHA 29 CFR 1915.82 also establishes portable-lighting requirements for shipyard employment where fixed lighting is unavailable.
• Outdoor and recreational applications include camping lanterns, portable flashlights and emergency-preparedness products. Non-rechargeable batteries remain relevant in these applications because they reduce dependence on charging infrastructure during extended off-grid use.
• Emergency and disaster management represents a highly regulated application area. NFPA 101 establishes emergency illumination levels, a 90-minute operating period and recurring inspection and testing requirements, influencing the design, selection and maintenance of battery-backed emergency lighting.

By Distribution Channel
• Offline distribution remains important for industrial and emergency battery-operated lights because purchasing decisions often involve certification documentation, hazardous-location suitability and compliance records. Trade distributors and specialist suppliers also support facility managers and industrial buyers in selecting products that meet specific operating requirements.
• Online distribution is widely used for consumer flashlights, lanterns and decorative battery lights. Standardised product specifications, battery-type information and charging-interface details allow consumers to compare products remotely. However, online consumer products are also subject to product-safety enforcement, as demonstrated by CPSC recalls involving button-cell flashlights and novelty lighting products.

Regional Analysis • North America follows UL 1576 and CSA C22.2 No. 250.5 for general-purpose battery-operated flashlights and lanterns operating at up to 75 V d.c. The 16 December 2024 revision addresses USB charging and automatic activation during line-voltage loss. Hazardous-location portable lights require UL 783 Edition 7, published on 10 February 2025, while emergency lighting follows UL 924 and NFPA 101. NFPA 101 establishes an average illumination level of one foot-candle at the start of the emergency period, declining to at least 0.6 foot-candle after 90 minutes, alongside monthly 30-second activation checks and annual 90-minute discharge tests. OSHA 29 CFR 1915.82 additionally requires suitable portable emergency lighting in shipyard employment where fixed lighting is unavailable.
• Europe applies EN IEC 60598-1:2024 Annex W to battery- and EDLC-supplied luminaires, with the stated publication date of 31 December 2025. The EU Battery Regulation 2023/1542 introduces battery removability and replaceability obligations from 18 February 2027, supported by Commission guidance C(2025)214 on easy removability and documentation. The EU General Product Safety Regulation also covers relevant battery-powered products below 50 V that fall outside the Low Voltage Directive.
• China requires CCC certification for lithium-ion batteries and battery packs under GB 31241-2022, mandatory from 1 August 2024 for covered portable electronic products weighing no more than 18 kg. The implementation rules under CNCA-C09-02:2025 became effective on 15 August 2025, with the 950°C-resistant steel engraving traceability requirement applying from 1 November 2025.
• India's Flashlight (Quality Control) Order, 2025 makes IS 2083:2024 and the BIS Standard Mark mandatory for covered flashlights. The compliance deadlines are 21 July 2025 for medium and large enterprises, 21 October 2025 for small enterprises and 21 January 2026 for micro enterprises. The supplied regulatory information also identifies exemptions for exports and limited research and development imports.
• The United Kingdom applies the Product Security and Telecommunications Infrastructure regime to relevant connectable battery-operated lights. The 2023 Regulations establish security requirements for covered products, including restrictions on default guessable credentials.
• The Gulf and broader Middle East follow national conformity assessment frameworks that reference IEC 60598 and IEC 62133-2. GSO IEC 62133-2:2021/Amd1:2026 provides a regional lithium-battery safety reference, while hazardous-location portable lighting follows the IEC 60079 framework rather than the UL 783 certification route.
• South America is influenced by national certification frameworks increasingly referencing IEC 62133-2 for lithium cells and batteries and IEC 60598 for luminaires. Certification requirements, enforcement capacity and documentation procedures vary across individual markets.

Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031

Aspects covered in this report
• Global Battery-Operated Lights Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Product Type
• Flashlights
• Lanterns
• Portable Work Lights
• Decorative Battery Lights
• Emergency Lights
• Other Battery-Operated Lights

By Battery Type
• Alkaline
• Lithium-Ion
• Nickel-Metal Hydride
• Other Battery Types

By Rechargeability
• Rechargeable
• Non-Rechargeable

By Application
• Residential
• Commercial
• Industrial
• Outdoor & Recreational
• Emergency & Disaster Management

By Distribution Channel
• Offline
• Online

Request Table of Contents

First Name

Last Name

Company Name

Job Title

Business Email

Contact Number

Description

Battery-Operated Lights Market Research FAQs

Key driver: Battery-level regulation and emergency-preparedness demand. Key challenge: Non-interchangeable certification routes and battery-accessibility enforcement. Key trend: Cell traceability and user-replaceability reshaping product architecture.

The report uses 2020 as the historic year, 2025 as the base year, 2026 as the estimated year, with forecasts up to 2031.

The Global Battery-Operated Lights Market is analysed by product type (Flashlights, Lanterns, Portable Work Lights, Decorative Battery Lights, Emergency Lights, Other Battery-Operated Lights); battery type (Alkaline, Lithium-Ion, Nickel-Metal Hydride, Other Battery Types); rechargeability (Rechargeable, Non-Rechargeable); application (Residential, Commercial, Industrial, Outdoor & Recreational, Emergency & Disaster Management); distribution channel (Offline, Online).

The report covers Global.

This report is open for pre-booking. Pre-book it to receive the full report as soon as it is released. You can also request a free sample and the table of contents in the meantime.

Yes. Bonafide Research can add countries, segments or company profiles to match your requirements. Request customisation.
Logo

Global Battery-Operated Lights Market Outlook, 2031

ChatGPT Summarize Gemini Summarize Perplexity AI Summarize Grok AI Summarize Claude Summarize

Contact usWe are friendly and approachable, give us a call.