If you purchase this report now and we update it in next 100 days, get it free!
The global occupancy sensor market is a building-code accessory market in which the sensor’s commercial value is determined less by its detection element than by the control sequence it enables and the regulatory instrument that mandates it. ASHRAE 90.1-2025 expands partial-OFF and full-OFF occupant sensing controls to a broader range of space types, including copy rooms, lounges, hospital lounges, and data centers, and it reduces the guest-room shutoff delay from 20 minutes to 15 minutes under the renumbered §9.4.1.4(b)(1). California Title 24 2025, effective for permits from 1 January 2025, reduces the occupant sensing time delay from 20 minutes to 15 minutes, requires occupant sensor control zones for offices larger than 250 square feet to be shown on lighting plans, and mandates vacancy sensors in dwelling units. The European Union’s revised Energy Performance of Buildings Directive 2024 requires non-residential buildings above 290 kW to be equipped with suitably zoned automatic lighting controls capable of occupancy detection by 31 December 2027, and extends the requirement to buildings above 70 kW by 31 December 2029. The specification and certification layer is where these code instruments translate into product requirements. DALI-2 certification of sensors and input devices is now underway under the IEC 62386 framework, with Part 303 covering occupancy sensors including presence and movement sensors and Part 304 covering light sensors, and a DALI-2 input device must implement Parts 101 and 103 alongside Part 303 to achieve certification. The DesignLights Consortium’s Networked Lighting Controls Qualified Products List recognises Category 4A products with occupancy or traffic and daylight or photocell integral sensor functions installed at the factory, and utility programmes tie rebate eligibility to listing under the correct control category. NEMA WD 50102-2011 (R2026), formerly designated NEMA WD 7, provides the standard definition and measurement of field of view and coverage characteristics for vacancy and occupancy sensors using passive infrared, ultrasonic, or combinations thereof, which gives specifiers a common reference for comparing coverage claims that manufacturer datasheets otherwise present in incompatible formats.
Legrand, Schneider Electric, Eaton, Johnson Controls, Signify, Acuity Brands, Leviton Manufacturing, Lutron Electronics, and Hubbell are the primary suppliers across the wired and wireless occupancy sensor categories, with each holding positions in specific control architectures rather than a single product tier. Leviton’s GreenMAX DRC Wireless sensor and photocell products add wireless occupancy and vacancy sensing and daylight harvesting with no additional wiring and are listed on the DLC QPL for Networked Lighting Controls, and the GreenMAX DRC low-voltage room controller is positioned for 2025 Title 24 Part 6 occupancy and vacancy sensing and multi-level lighting control. Acuity Brands’ SensorSwitch AIR wireless products are DLC NLC qualified for luminaire-level lighting control, and the PL20 SSA wireless plug load receptacle pairs with AIR occupancy sensors to control plug loads based on room occupancy. LiteTrace’s IWS102 and DWS102 Bluetooth wall switches with integrated occupancy sensors are DLC-qualified and cULus-listed, with 1600 W+ load capacity and a 100-foot Bluetooth range, and the BCS107 battery-powered ceiling sensor combines PIR occupancy sensing with daylight harvesting in a device with up to 10-year battery life and no wiring requirement. The DALI-2 certification axis is where specialist manufacturers compete against the large controls brands. EmCom Technology’s presence detectors implement Parts 303 and 304 of DALI-2 certification, combining a PIR occupancy sensor with a lux sensor in a single DALI-2 input device. Steinel’s presence detectors are certified according to IEC 62386 and externally approved and measured according to sensNORM, which indicates that performance norms beyond the certification minimum are part of the competitive field at the high end of the market. Entry barriers sit at the DLC listing level because utility rebate programmes require it, at the DALI-2 certification level because cross-vendor interoperability in networked systems depends on it, and at the commissioning-documentation level because ASHRAE 90.1-2025 and Title 24 acceptance tests require evidence that sensor placement, zoning, and time-delay settings satisfy the code rather than merely that the device functions.
What's Inside a Bonafide Research`s industry report?
A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.
Market DynamicsDriver: Code-mandated vacancy response and granular zoning converting sensors into permit conditions Building energy codes have made occupancy sensing a condition of permit approval and utility rebate eligibility, and the specificity of the requirements has increased in ways that expand the addressable specification pool. ASHRAE 90.1-2025 expands partial-OFF and full-OFF occupant sensing to copy rooms, lounges, hospital lounges, and data centers, reduces the guest-room shutoff delay to 15 minutes, and requires warehouse aisleway lighting to be controlled independently of all other aisleways and open areas. Title 24 2025 reduces the time delay to 15 minutes, requires occupant sensor control zones on lighting plans for offices over 250 square feet, and mandates vacancy sensors in dwelling units. The EU EPBD 2024 adds a dated compliance runway through 2027 and 2029 that applies to the non-residential building stock above 290 kW and then 70 kW. The GSA’s Green Proving Ground programme measured 40 percent lighting energy savings from advanced controls including occupancy sensing compared with a baseline conforming to GSA’s retrofit standard, which gives building owners a documented financial basis alongside the compliance obligation.
Challenge: Sensor false-off errors and technology-specific failure modes undermining savings and occupant acceptance The principal constraint on occupancy sensor market conversion is detection reliability, because a sensor that switches lights off while a space is occupied, or fails to switch them off when it is vacant, defeats both the energy-saving and the occupant-satisfaction case for the installation. PIR sensors detect motion rather than presence and are susceptible to false-off errors when occupants are stationary, with dead spots at distances beyond approximately fifteen feet where the Fresnel-lens detection zones widen and lose sensitivity. Ultrasonic sensors eliminate PIR dead spots but are sensitive to air turbulence from HVAC diffusers and ceiling fans, and microwave sensors can penetrate walls and trigger on movement in adjacent rooms. The commissioning burden compounds the technology limitation, because Title 24 requires acceptance testing by a certified Acceptance Test Technician using compliance document NRCA-LTI-02-A, and the test must be performed when the technician can exercise full control over space occupancy, with the time delay reset to a maximum of 20 minutes upon completion. The result is that the sensor’s value is realised only when it is specified as part of a commissioned control sequence, and sensors sold as isolated components frequently underperform the savings that government field studies document.
Trend: DALI-2 and DLC-listed networked architectures absorbing standalone sensors into the addressable building layer Occupancy sensors are migrating from standalone switching devices into addressable nodes within networked control systems, and the certification infrastructure is formalising this shift. DALI-2 certification now covers occupancy sensors as input devices under Part 303, with presence and movement sensor instances reporting standardised occupancy data to the control system rather than merely switching a load, and a certified device implements Parts 101, 103, and 303 together. The DLC’s Networked Lighting Controls Category 4A recognises luminaires and retrofit kits with occupancy and daylight integral sensor functions installed at the factory, and Category 4B addresses networked controllers that operate as part of a listed NLC system, which means that the same sensing element occupies a different competitive position depending on whether it is embedded in a luminaire or operates as a system node. Leviton’s GreenMAX DRC Wireless and Acuity’s SensorSwitch AIR products illustrate the direction: the sensor is commissioned, zoned, and reported on through the control system, and utility rebate eligibility follows the system listing rather than the device alone.
Make this report your own
Have queries/questions regarding a report
Take advantage of intelligence tailored to your business objective
Reecha Roy
Research Analyst
Segmentation AnalysisBy Sensor Technology • Passive infrared sensors detect changes in infrared radiation caused by occupant movement and constitute the most widely deployed occupancy sensing technology, delivering fewer false trips and more stable operation than alternatives in offices, homes, hallways, and retail stores when properly tuned, though they are susceptible to false-off errors when occupants remain stationary beyond the effective detection range. • Ultrasonic sensors emit and detect high-frequency sound waves and eliminate PIR dead spots by detecting motion through reflections, but they are sensitive to air turbulence from HVAC vents and ceiling fans and more prone to nuisance switching, with false-on events from minor disturbances such as airflow or vibrations. • Microwave sensors use Doppler shift to detect motion and can penetrate plastic, glass, and thin non-metal materials, allowing installation behind partitions, though they cannot penetrate metal and may trigger false alarms from objects moving in the wind or from movement in adjacent rooms. • Dual-technology sensors combine PIR with ultrasonic or microwave detection, with PIR turning lights on and the second technology maintaining them on during subtle movement, which eliminates the false-off issues common with PIR alone and reduces the false-on problems associated with ultrasonic sensors, making the combination more reliable in corridors, stairwells, and open-plan offices where a single technology tends to misfire.
By Mounting Type • Ceiling-mounted sensors constitute the largest mounting category because the ceiling position provides a clear line of sight to the occupied zone and is the default for office, corridor, restroom, and open-plan applications, with high-bay ceiling sensors designed specifically for warehouse and manufacturing environments where mounting heights exceed standard ceiling grids. • Wall-mounted sensors serve smaller spaces, storage rooms, and retrofit applications where ceiling access is constrained, and wall-switch occupancy sensors with integrated sensing are a common replacement for standard light switches in Title 24-compliant residential and small commercial projects. • Fixture-integrated sensors embed the occupancy sensing element directly in the luminaire or retrofit kit, and the DLC’s Category 4A listing covers products with occupancy and daylight integral sensor functions installed at the factory, which means that a fixture-integrated sensor is specified as part of the luminaire rather than as a separate control device. • Fixture-integrated sensing is the architecture most aligned with luminaire-level lighting control, where each fixture carries its own sensor and control intelligence rather than relying on a remote sensor and room controller.
By Connectivity • Wired connectivity remains the default for code-compliant commercial and institutional installations because it provides deterministic power and communication, and DALI-2 certification under IEC 62386 is a wired bus standard that carries both power and data to the sensor, with certified devices implementing Parts 101, 103, and 303. • Wireless connectivity is the faster-growing architecture in retrofit and residential applications because it avoids the need to run control wiring to sensor locations, and Leviton’s GreenMAX DRC Wireless products add wireless occupancy and vacancy sensing and daylight harvesting with no additional wiring while remaining DLC-listed, LiteTrace’s BCS107 battery-powered ceiling sensor offers up to 10-year battery life and a 200-foot Bluetooth range with no wiring required, and Acuity’s SensorSwitch AIR products are DLC NLC qualified for wireless luminaire-level control. • The wireless segment is where the retrofit market’s growth is concentrated because the installed base of buildings without control wiring is far larger than the new-construction pipeline, and the DLC’s Networked Lighting Controls framework explicitly accommodates wireless architectures.
Don't pay for what you don't need. Save 30%
Customise your report by selecting specific countries or regions
By Application • Commercial applications represent the largest specification-driven demand pool because offices, retail, hospitality, and institutional buildings combine code-mandated occupancy and daylight sensing with utility rebate eligibility tied to DLC listing, and the ASHRAE 90.1-2025 expansion to copy rooms, lounges, and data centers brings additional commercial space types into the requirement. • Industrial applications require aisleway-specific occupancy control in warehouses and storage areas, with ASHRAE 90.1-2025 requiring lighting in each aisleway to be controlled independently of all other aisleways and open areas, and occupant sensors to automatically reduce lighting power within each controlled area to an unoccupied setpoint. • Residential applications use occupancy and vacancy sensors in dwelling units, and Title 24 2025 requires vacancy sensors in residential dwelling units where each controlled electrical box must be controlled by a vacancy sensor, dimmer, low-voltage wiring, or fan speed control. • Institutional applications, including schools, hospitals, and government buildings, operate under the same code framework as commercial buildings but with public-procurement requirements that add certification and domestic-content dimensions to sensor specification, and the GSA/LBNL field study documenting 40 percent savings was conducted across federal buildings in this segment.
By Distribution Channel • Direct sales dominate specification-grade commercial and institutional projects because the occupancy sensor must be selected as part of a lighting control sequence, commissioned against the space layout, and documented for code compliance through the Title 24 acceptance test or the ASHRAE 90.1 commissioning process, and these activities require engagement between the controls manufacturer, the lighting designer, and the acceptance test technician. • Indirect sales through electrical wholesalers and lighting distributors serve replacement, small retrofit, and maintenance demand, and the wholesaler’s ability to confirm DLC listing, DALI-2 certification, or Title 24 compliance at the counter determines the transaction for the contractor or facility maintenance team buying a replacement sensor.
Regional Analysis • North America operates under ASHRAE 90.1-2025, which expands partial-OFF and full-OFF occupant sensing to copy rooms, lounges, hospital lounges, and data centers, reduces the guest-room shutoff delay to 15 minutes, and requires warehouse aisleway lighting to be controlled independently, alongside California Title 24 2025, which reduces the occupant sensing time delay to 15 minutes, requires occupant sensor control zones on lighting plans for offices over 250 square feet, mandates vacancy sensors in dwelling units, and requires acceptance testing by a certified technician using NRCA-LTI-02-A with the time delay reset to a maximum of 20 minutes upon completion. • Europe applies the revised EPBD 2024, which requires non-residential buildings above 290 kW to have suitably zoned automatic lighting controls capable of occupancy detection by 31 December 2027 and extends the requirement to buildings above 70 kW by 31 December 2029, alongside IEC 60669-2-1:2021 for electronic control device safety and the DALI-2 IEC 62386 framework for interoperable sensor certification, with LightingEurope clarifying that occupancy detection alone does not satisfy the BACS requirement. • China operates under GB 55015-2021, which requires corridors, stairwells, foyers, elevator lobbies, and parking garages where no one remains for long periods to be capable of energy-saving control according to lighting demand, and GB/T 50034-2024, effective 1 August 2024, which introduces intelligent lighting provisions and retains the requirement for automatic sensing control in short-occupancy spaces. India’s Energy Conservation Building Code requires occupancy sensors to turn off or dim lighting fixtures within 15 minutes of an occupant leaving the space, with a wall-mounted manual switch capable of turning off lights when the space is occupied, and mandates automatic control for at least 90 percent of interior lighting by wattage in applicable buildings. • Saudi Arabia applies the Saudi Building Code 601 on Energy Conservation, which mandates occupancy-based lighting control in new commercial buildings, effectively requiring PIR or similar occupancy sensors in many spaces, with SASO certification required for PIR motion sensors and related devices and SASO 2902 and 2870 providing the energy-efficiency framework for the lighting products that the sensors control. • Brazil requires INMETRO certification for smart home devices including sensors before they can be legally sold, with conformity assessment carried out by an INMETRO-accredited body, and component supply is being strengthened through domestic production of LED modules, drivers, and sensors to reduce import dependency.
Considered in this report • Historic Year: 2020 • Base year: 2025 • Estimated year: 2026 • Forecast year: 2031
Aspects covered in this report • Global Occupancy Sensor Market with its value and forecast along with its segments • Various drivers and challenges • On-going trends and developments • Top profiled companies • Strategic recommendation
By Mounting Type • Ceiling-Mounted • Wall-Mounted • Fixture-Integrated
By Connectivity • Wired • Wireless
By Application • Residential • Commercial • Industrial • Institutional
By Distribution Channel • Direct Sales • Indirect Sales
Request Table of Contents
Occupancy Sensor Market Research FAQs
Key driver: Code-mandated vacancy response and granular zoning converting sensors into permit conditions. Key challenge: Sensor false-off errors and technology-specific failure modes undermining savings and occupant acceptance. Key trend: DALI-2 and DLC-listed networked architectures absorbing standalone sensors into the addressable building layer.
The report uses 2020 as the historic year, 2025 as the base year, 2026 as the estimated year, with forecasts up to 2031.
The Global Occupancy Sensor Market is analysed by sensor technology (Passive Infrared (PIR), Ultrasonic, Microwave, Dual-Technology); mounting type (Ceiling-Mounted, Wall-Mounted, Fixture-Integrated); connectivity (Wired, Wireless); application (Residential, Commercial, Industrial, Institutional); distribution channel (Direct Sales, Indirect Sales).
The report covers Global.
This report is open for pre-booking. Pre-book it to receive the full report as soon as it is released. You can also request a free sample and the table of contents in the meantime.
Yes. Bonafide Research can add countries, segments or company profiles to match your requirements. Request customisation.
One individual can access, store, display, or archive the report in Excel format but cannot print, copy, or share it. Use is confidential and internal only. License information
One individual can access, store, display, or archive the report in PDF format but cannot print, copy, or share it. Use is confidential and internal only. License information
Up to 10 employees in one region can store, display, duplicate, and archive the report for internal use. Use is confidential and printable. License information
All employees globally can access, print, copy, and cite data externally (with attribution to Bonafide Research). License information