If you purchase this report now and we update it in next 100 days, get it free!
The global lighting sensors market is a code-compliance market in which the sensor's commercial value is determined less by its detection technology than by the control sequence it enables and the regulatory instrument that mandates it. IEC 60669-2-1:2021 is the foundational product safety standard, applying to electronic control devices and electronic extension units with rated supply voltages not exceeding 250 volts AC and 120 volts DC, and explicitly covering sensors and push buttons within its scope, with a corrigendum issued in 2024 confirming the standard's continued applicability. The building-code layer has tightened substantially in the past eighteen months. ASHRAE 90.1-2025 expands partial-OFF and full-OFF occupant sensing controls to a broader range of space types, emphasises more granular zoning that groups luminaires effectively with occupancy and daylight sensors, and requires lights and receptacles in hotels and multifamily units to shut off automatically within 20 minutes of vacancy, while daylight-responsive controls are required to dim to 10 percent of power rather than the prior 20 percent. California's Title 24 2025 reduces the occupant sensing control time delay to 15 minutes, requires partial or full OFF occupant sensing controls in more spaces, and mandates occupant sensor control zones for offices larger than 250 square feet to be shown on the lighting plans, with automatic shutoff required within 20 minutes for spaces typically unoccupied and restrooms required to use occupant sensors that shut lights off within 20 minutes of vacancy.
The DALI-2 certification axis is the clearest competitive filter. A DALI-2 certified occupancy sensor must comply not only with electrical safety and EMC requirements but also with IEC 62386 Parts 101, 103, 303, and 304, and products such as the IRTEC MRA-124S and MRA-124W are positioned on this basis as fully compliant DALI input devices with digital pyroelectric infrared and ambient light sensing. Steinel's presence detectors are certified according to IEC 62386 and externally approved and measured according to sensNORM, which indicates that the competitive field includes third-party performance norms beyond the certification minimum, and EmCom Technology's presence detectors implementing Parts 303 and 304 of DALI-2 certification illustrate that the input-device certification route is accessible to specialist manufacturers as well as large controls brands. The DLC listing axis separates suppliers who can participate in funded retrofit programmes from those confined to code-minimum specification. Leviton's GreenMAX DRC low-voltage room controller is listed on the DLC Qualified Products List and is positioned for 2025 Title 24 Part 6 occupancy and vacancy sensing and multi-level lighting control, and Leviton's GreenMAX DRC Wireless sensor and photocell products add wireless occupancy and vacancy sensing and daylight harvesting with no additional wiring and are listed on the DLC QPL for Networked Lighting Controls. The DLC's category structure distinguishes between non-networked luminaires or retrofit kits with integral occupancy and daylight sensor functions and networked controllers that operate as part of a DLC-listed system, which means that a standalone sensor and a networked sensor node occupy different competitive positions even if they use the same sensing element. The sensor technology portfolio axis is where application-specific engineering capability becomes visible.
What's Inside a Bonafide Research`s industry report?
A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.
Market DynamicsDriver: Code-mandated vacancy response and granular zoning converting sensors into permit conditions Building energy codes have made occupancy sensing a condition of permit approval and utility rebate eligibility, and the specificity of the requirements has increased in ways that expand the addressable specification pool. ASHRAE 90.1-2025 expands partial-OFF and full-OFF occupant sensing controls to a broader range of space types, emphasises more granular zoning, and requires hotel and multifamily lights and receptacles to shut off within 20 minutes of vacancy, while Title 24 2025 reduces the time delay to 15 minutes and requires occupant sensor control zones to be shown on lighting plans for offices larger than 250 square feet. The EU EPBD 2024 adds a dated compliance runway, with suitably zoned automatic lighting controls with occupancy detection required in non-residential buildings above 290 kilowatts by 31 December 2027 and above 70 kilowatts by 31 December 2029. The GSA's Green Proving Ground programme, with Lawrence Berkeley National Laboratory, measured 40 percent lighting energy savings from advanced controls including occupancy sensing compared with a baseline conforming to GSA's retrofit standard, which gives building owners a documented financial basis alongside the compliance obligation.
Challenge: Sensor false-off errors and technology-specific failure modes undermining savings claims The principal constraint on lighting sensor market conversion is not sensor cost but detection reliability, because a sensor that switches lights off while a space is occupied, or fails to switch them off when it is vacant, defeats both the energy-saving and the occupant-satisfaction case for the installation. PIR sensors detect motion rather than presence and are susceptible to false-off errors when occupants are stationary, ultrasonic sensors mitigate this but require clear line of sight and are sensitive to air turbulence from HVAC vents and ceiling fans, and microwave sensors can penetrate walls and trigger on movement in adjacent rooms, generating roughly two to three times more nuisance trips than PIR in outdoor scenarios with wind-driven foliage and rain. The commissioning burden compounds the technology limitation, because ASHRAE 90.1-2025's granular zoning requirement and Title 24's plan-submission requirement for occupant sensor control zones mean that sensor placement, zoning, and time-delay configuration must be documented rather than left to installer discretion, and LightingEurope has noted that occupancy detection alone is not sufficient to comply with the EPBD's BACS requirements, which implies that the sensor must be part of a commissioned control system rather than an isolated device.
Trend: DALI-2 and networked control integration absorbing sensors into the addressable building data layer Lighting sensors are migrating from standalone switching devices into addressable nodes within networked control systems, and the certification infrastructure is formalising this shift. DALI-2 certification of sensors and input devices is now underway under the IEC 62386 framework, with Part 303 covering occupancy sensor capabilities and instance types for presence and movement, and Part 304 covering light sensors with 10-bit resolution, which means that a certified sensor reports standardised occupancy and light-level data to the control system rather than merely switching a load. The DLC's Networked Lighting Controls QPL recognises controllers and network interfaces that affect lighting changes to luminaires, with sensor-based strategies required for advanced networked lighting control incentives, and Leviton's GreenMAX DRC Wireless products add occupancy and vacancy sensing and daylight harvesting without additional wiring while remaining DLC-listed. This trend aligns with the EPBD's treatment of lighting control as a BACS function and with ASHRAE 90.1-2025's granular zoning requirement, because an addressable sensor can be assigned to a zone, commissioned, and reported on in a way that a standalone occupancy switch cannot.
Make this report your own
Have queries/questions regarding a report
Take advantage of intelligence tailored to your business objective
Reecha Roy
Research Analyst
Segmentation AnalysisBy Sensor Type • Daylight sensors measure available natural light and signal dimming or switching of electric lighting, and they are governed by the same code instruments that mandate daylight-responsive control, with ASHRAE 90.1-2025 requiring daylight-responsive controls to dim to 10 percent of power and Title 24 2025 requiring daylighting controls to be integrated with occupancy and scheduling systems for improved energy savings. • Occupancy sensors detect the presence or absence of occupants and are the most heavily mandated sensor type, with ASHRAE 90.1-2025 expanding partial-OFF and full-OFF occupant sensing to more space types, Title 24 2025 requiring occupant sensor control zones on lighting plans, and India's ECBC requiring at least 80 percent dimming or shutoff within 15 minutes of vacancy. • Motion sensors detect movement rather than presence and serve applications where occupancy sensing is not required but movement-based activation is sufficient, and they are the sensor type most exposed to the PIR false-off limitation in spaces where occupants remain stationary. • Colour sensors and other lighting sensors occupy a smaller niche in application-specific control, including colour-tunable lighting and horticultural or specialty applications, and their regulatory driver is the lighting system specification rather than the general occupancy or daylight codes.
By Technology • Passive infrared sensors detect changes in infrared radiation caused by occupant movement and are the most widely deployed occupancy sensing technology, delivering fewer false trips and more stable operation than alternatives when properly tuned for the majority of spaces including offices, homes, hallways, and retail stores, though they are susceptible to false-off errors when occupants are stationary. • Ultrasonic sensors emit and detect high-frequency sound waves and are particularly useful in areas where PIR sensors may not be effective, such as open-plan offices or areas with obstructions, but they are sensitive to air turbulence from HVAC vents and ceiling fans and require clear line of sight between sensor and occupants. • Microwave sensors detect movement through Doppler shift and can detect motion even through plastic, glass, and thin non-metal materials, and they are often combined with PIR or ultrasonic sensors to improve accuracy and reduce false alarms, though they can penetrate walls and trigger on movement in adjacent rooms and generate more nuisance trips than PIR in outdoor scenarios. • Photodetection technology underlies daylight and photocell sensing, and it is the technology through which daylight-responsive control mandates in ASHRAE 90.1-2025 and Title 24 2025 are satisfied.
By Connectivity • Wired connectivity remains the default for code-compliant commercial and institutional installations because it provides deterministic power and communication, and DALI-2 certification under IEC 62386 is a wired bus standard that carries both power and data to the sensor, with DALI-2 certified sensors complying with Parts 101, 103, 303, and 304. • Wireless connectivity is the faster-growing architecture in retrofit and residential applications because it avoids the need to run control wiring to sensor locations, and Leviton's GreenMAX DRC Wireless products add wireless occupancy and vacancy sensing and daylight harvesting with no additional wiring while remaining DLC-listed, while the DLC QPL explicitly recognises wireless Bluetooth networked control with microwave occupancy and daylight sensor functionality.
Don't pay for what you don't need. Save 30%
Customise your report by selecting specific countries or regions
By Application • Indoor lighting represents the largest application pool because offices, retail, education, healthcare, and hospitality interiors are the space types covered by ASHRAE 90.1-2025, Title 24 2025, the EPBD BACS requirements, and China's GB 55015-2021 and GB/T 50034-2024, and the sensor must satisfy the applicable time delay, zoning, and dimming requirements for each space type. • Outdoor lighting applications use motion and occupancy sensors for security and area lighting, and microwave sensors are more common in outdoor applications despite generating more nuisance trips than PIR, because their ability to detect through materials and over longer ranges suits pole-mounted and perimeter installations. Automotive lighting sensors operate outside the building-code framework and are governed by automotive-specific requirements for light sensing and driver assistance, and industrial lighting sensors serve warehouses, production areas, and high-bay environments where aisleway-specific control is required, with ASHRAE 90.1-2025 requiring occupant sensors to control lighting in each warehouse aisleway independently and not control lighting beyond the aisleway being controlled.
By End-user • Residential end-users consume sensors through lighting controls in homes, and the code driver in the residential segment is the vacancy sensor requirement in Title 24 2025 for dwelling units, where each controlled electrical box must be controlled by a vacancy sensor, dimmer, low-voltage wiring, or fan speed control. • Commercial end-users constitute the largest specification-driven demand pool because office, retail, and hospitality projects combine code-mandated occupancy and daylight sensing with utility rebate eligibility tied to DLC listing, and the GSA/LBNL measured 40 percent savings in federal office buildings demonstrates the financial case in this segment. • Industrial end-users require aisleway-specific occupancy control and robust sensors for warehouse and production environments, and ASHRAE 90.1-2025's requirement for independent aisleway control and at least 50 percent reduction when unoccupied sets the performance expectation. • Automotive end-users operate under vehicle-specific sensing requirements rather than the building-code framework, and the sensor technologies and certification regimes differ fundamentally from those governing building lighting sensors.
Regional Analysis • North America operates under ASHRAE 90.1-2025, which expands partial-OFF and full-OFF occupant sensing to more space types, emphasises granular zoning, requires hotel and multifamily shutoff within 20 minutes, and requires daylight-responsive dimming to 10 percent, alongside Title 24 2025, which reduces the occupant sensing time delay to 15 minutes, requires occupant sensor control zones on lighting plans for offices over 250 square feet, and mandates vacancy sensors in dwelling units, with NEC 2023 Section 404.2(C) requiring a grounded neutral conductor at lighting switch locations for occupancy sensors and electronic switches. • Europe applies IEC 60669-2-1:2021 for electronic control device safety, with EN IEC 60669-2-1:2022 and corrigendum January 2024 as the harmonised European version covering sensors and push buttons, alongside the revised EPBD 2024, which requires suitably zoned automatic lighting controls with occupancy detection in non-residential buildings above 290 kilowatts by 31 December 2027 and above 70 kilowatts by 31 December 2029, and LightingEurope's clarification that a lighting control system is a BACS and must satisfy the directive's lighting control capabilities. • China operates under GB 55015-2021, which incorporates the mandatory lighting power density provisions and requires energy-saving control in corridors, stairwells, foyers, elevator lobbies, and parking garages where no one remains for long periods, alongside GB/T 50034-2024 effective 1 August 2024, which introduces intelligent lighting and health lighting provisions and retains the target and current LPD values for various space types. India's Energy Conservation Building Code requires occupancy sensors to turn off or dim lighting by at least 80 percent within 15 minutes of vacancy, with a wall-mounted manual switch for controlled fixtures, and mandates automatic control for at least 90 percent of interior lighting by wattage through scheduling or occupancy sensing, while BIS certification under the ISI Mark and CRS schemes governs the product approvals for switches, sockets, and LED drivers that the sensor interfaces with. • Saudi Arabia applies the Saudi Building Code 601 on Energy Conservation, which mandates occupancy-based lighting control in new commercial buildings, with SASO certification required for PIR motion sensors, occupancy sensors, vacancy sensors, and motion sensor switches, and SASO 2902:2018 providing the energy-efficiency framework for the lighting products that the sensors control. • Brazil's INMETRO framework requires smart home devices including sensors to obtain INMETRO certification before legal sale, with conformity assessment carried out by an INMETRO-accredited inspection body for energy efficiency in buildings under PROCEL, and component supply is being strengthened through domestic production of LED modules, drivers, and sensors to reduce import dependency.
Considered in this report • Historic Year: 2020 • Base year: 2025 • Estimated year: 2026 • Forecast year: 2031
Aspects covered in this report • Global Lighting Sensors Market with its value and forecast along with its segments • Various drivers and challenges • On-going trends and developments • Top profiled companies • Strategic recommendation
By Sensor Type • Daylight Sensors • Occupancy Sensors • Motion Sensors • Colour Sensors • Other Lighting Sensors
By End-user • Residential • Commercial • Industrial • Automotive
Request Table of Contents
Lighting Sensors Market Research FAQs
Key driver: Code-mandated vacancy response and granular zoning converting sensors into permit conditions. Key challenge: Sensor false-off errors and technology-specific failure modes undermining savings claims. Key trend: DALI-2 and networked control integration absorbing sensors into the addressable building data layer.
The report uses 2020 as the historic year, 2025 as the base year, 2026 as the estimated year, with forecasts up to 2031.
The Global Lighting Sensors Market is analysed by sensor type (Daylight Sensors, Occupancy Sensors, Motion Sensors, Colour Sensors, Other Lighting Sensors); technology (Passive Infrared (PIR), Ultrasonic, Microwave, Photodetection); connectivity (Wired, Wireless); application (Indoor Lighting, Outdoor Lighting, Automotive Lighting, Industrial Lighting); end-user (Residential, Commercial, Industrial, Automotive).
The report covers Global.
This report is open for pre-booking. Pre-book it to receive the full report as soon as it is released. You can also request a free sample and the table of contents in the meantime.
Yes. Bonafide Research can add countries, segments or company profiles to match your requirements. Request customisation.
One individual can access, store, display, or archive the report in Excel format but cannot print, copy, or share it. Use is confidential and internal only. License information
One individual can access, store, display, or archive the report in PDF format but cannot print, copy, or share it. Use is confidential and internal only. License information
Up to 10 employees in one region can store, display, duplicate, and archive the report for internal use. Use is confidential and printable. License information
All employees globally can access, print, copy, and cite data externally (with attribution to Bonafide Research). License information