If you purchase this report now and we update it in next 100 days, get it free!
The global emergency lighting market is a life-safety compliance market in which demand is created by code enforcement rather than by discretionary spending, and the regulatory architecture differs more sharply across jurisdictions than in any other lighting category. In the United States, NFPA 101 requires emergency illumination to activate within 10 seconds of normal power loss and to sustain an average of 1 foot-candle (10.8 lux) initially along the path of egress, declining to no less than 0.6 foot-candles (6.5 lux) average and 0.1 foot-candle (1.1 lux) at any point by the end of the 90-minute duration; testing obligations are equally specific, with monthly 30-second functional checks and annual 90-minute full-discharge tests required for every fixture, and written records treated as a condition of compliance. UL 924 governs equipment listing, and the National Electrical Manufacturers Association’s technical bulletins clarify that only products certified to UL 924 are suitable for emergency lighting systems, with emergency battery packs requiring a means for permanent mounting to the luminaire. Europe operates on a different clock and a different logic. EN 1838 requires 50 percent of the required illuminance within 5 seconds and the full value within 60 seconds of supply failure, with a minimum of 1 lux along the centre line of the escape route for normal-risk premises, and the standard’s nominal duration is one hour, rising to three hours for premises used as sleeping accommodation including hospitals, care homes, and hotels. IEC 60598-2-22:2021 provides the product-level safety requirements for emergency luminaires, with the fifth edition superseding the 2014 fourth edition and its 2017 amendment.
China’s GB 17945-2024, the mandatory national standard for fire emergency lighting and evacuation indicating systems, was published on 29 April 2024 and took effect on 1 May 2025, replacing GB 17945-2010, with certification implementation rules revised and products not conforming to the new standard prohibited from sale in the Chinese market. India’s Bureau of Indian Standards has issued IS 10322 (Part 5/Section 8):2026 for luminaires for emergency lighting as the first revision of the 2013 standard, aligning it with IEC 60598-2-22:2021 and extending coverage to emergency lighting chains, with the revised series applying to fixed, recessed, street, flood, hand, and emergency luminaires. India’s National Building Code provisions, administered through the Bureau of Indian Standards, require emergency lighting to activate within 5 seconds of normal supply failure and to sustain the required illumination for not less than 90 minutes even in smaller premises, and exit signs must be green and visible from no more than 30 metres along any exit access path. These national instruments interact with Gulf requirements, where the Saudi Building Code §1008.3.4 mandates at least 90 minutes of battery duration for new buildings with an initial average of 11 lux stepping down to 6 lux, and where UAE Civil Defence recognises testing to EN 60598-2-22, EN 62034 for automatic test systems, and EN 50171 for central battery systems.
What's Inside a Bonafide Research`s industry report?
A Bonafide Research industry report provides in-depth market analysis, trends, competitive insights, and strategic recommendations to help businesses make informed decisions.
In the United States, the DesignLights Consortium’s qualified products framework does not govern emergency lighting in the way it governs commercial luminaires; instead, UL 924 listing and NFPA 101 installation compliance are the gating criteria, and the National Electrical Manufacturers Association’s LS 20028-2024 guide functions as the reference document that manufacturers, specifiers, and authorities use to interpret the relationship between equipment standards and installation codes. In the Gulf, UAE Civil Defence maintains a list of accepted laboratories, and UL Solutions’ Carugate laboratory was added in July 2022 for testing emergency lighting luminaires to EN 60598-2-22, automatic test lighting systems to EN 62034, and central battery lighting systems to EN 50171, which means that laboratory recognition is itself a competitive gateway for manufacturers seeking UAE market access. In China, the GB 17945-2024 transition required manufacturers to secure certification under the revised implementation rules, and products not conforming to the new standard are barred from sale, which has the effect of resetting the competitive field around certification readiness rather than installed brand position. Entry barriers therefore sit at multi-regime certification file management, at the engineering capability to support both self-contained and central battery architectures, and at the documentation and test-evidence infrastructure that authorities having jurisdiction require at inspection.
Market DynamicsDriver: Code enforcement and inspection failure rates creating non-discretionary replacement demand Emergency lighting demand is driven by enforcement rather than by construction cycles, because the installed base’s persistent failure to satisfy testing requirements generates replacement and remediation work independent of new building activity. Industry compliance data shows that 43 percent of fire marshal violations in commercial buildings involve emergency egress lighting, and that approximately 76 percent of buildings fail exit-lighting-related inspections in a given year, with a documented school case seeing 23 percent of emergency units fail the mandatory 90-minute discharge test alongside an 18-month absence of monthly 30-second check records. NFPA 101 requires written records of all emergency lighting tests, and verbal logs do not satisfy the requirement, which means that the documentation obligation itself creates a compliance service and product opportunity around automated test and monitoring systems. The duration requirements reinforce the replacement cycle: 90 minutes under NFPA 101 and the Saudi Building Code, one hour under EN 1838 for general premises and three hours for sleeping accommodation, and 90 minutes under India’s National Building Code, all of which degrade battery performance over time and force periodic battery or luminaire replacement regardless of fixture condition.
Challenge: Architecture lock-in and battery maintenance burden across a fragmented installed base The emergency lighting installed base is locked into architecture choices that were made decades ago, and the maintenance burden associated with those choices constrains the pace of upgrade rather than the pace of new specification. Self-contained luminaires dominate the legacy installed base because they were the default specification for decades, and their batteries have a service life of only three to five years, which means that a substantial portion of the installed base requires battery replacement at any given time independent of luminaire condition. Central battery systems reduce per-fixture maintenance but introduce protected routing and single-point-of-failure requirements, and the decision to migrate from one architecture to the other is a capital project rather than a maintenance transaction. The certification transition adds a second constraint, because products designed to the superseded GB 17945-2010 standard in China or the IS 10322 (Part 5/Section 8):2013 standard in India must be redesigned and retested against the 2024 and 2026 revisions respectively, and a product that meets NFPA 101 and UL 924 may still require separate EN 60598-2-22 and EN 1838 compliance for European or Gulf specification.
Make this report your own
Have queries/questions regarding a report
Take advantage of intelligence tailored to your business objective
Reecha Roy
Research Analyst
Trend: Automated test and remote monitoring shifting emergency lighting into the building management stack Automated test systems and remote monitoring are moving emergency lighting from a manually inspected, documentation-heavy obligation into a connected building system, and the regulatory framework is beginning to recognise this shift explicitly. EN 62034 governs automatic test systems for battery-powered emergency escape lighting, and UAE Civil Defence recognises testing to EN 62034 alongside EN 60598-2-22 and EN 50171, which signals that the Gulf market treats automatic test capability as a certifiable product category rather than a convenience feature. The self-contained versus central battery evaluation literature identifies automatic testing as the variable that most changes the cost-effectiveness ranking between architectures, and central battery systems’ ability to record test results automatically and support remote inspection is cited as a decisive advantage in facilities where high-mounted luminaires make manual inspection expensive. The compliance-inspection data showing widespread documentation failures reinforces the direction of travel, because automated logging addresses the failure mode that authorities having jurisdiction most consistently cite.
Segmentation AnalysisBy Product Type • Emergency exit signs constitute the most visible and most frequently inspected product category, because NFPA 101 and the Indian National Building Code both require exit signs to be illuminated and visible from defined distances along the egress path, with India specifying green signs visible from no more than 30 metres and the United Kingdom requiring signs to comply with BS 5266-1 and BS EN 60598-2-22 under the Regulatory Reform (Fire Safety) Order 2005. • Emergency luminaires form the larger volume category because they provide the actual egress-path illumination that NFPA 101 measures at 1 foot-candle average initially and 0.6 foot-candles average at duration end, and because every egress path, intersection, staircase, and change of direction requires coverage under the Indian code’s siting rules. • Emergency bulkhead lights serve stairwells, plant rooms, and industrial environments where a robust, surface-mounted, often IP-rated fixture is required, and their specification is driven by the physical environment rather than by photometric performance alone. • Emergency floodlights address large-area egress and perimeter illumination in industrial, logistics, and infrastructure settings where the egress path extends beyond the building envelope, and their higher output and directional optics distinguish them from general egress luminaires.
By Power Source • Self-contained battery systems remain the volume-dominant architecture because each luminaire operates autonomously with its own battery and charging circuitry, which reduces vulnerability to single-point failure and simplifies the wiring topology, but the trade-off is a battery service life of three to five years and a maintenance burden that scales with fixture count. • Central battery systems are gaining specification share in facilities where high-mounted luminaires make per-fixture maintenance expensive, because centralised charging reduces cumulative standby load, simplifies servicing, and supports remote inspection and automatic test logging, with EN 50171 providing the product-level standard for central battery systems that UAE Civil Defence recognises. • The architecture choice is not binary across a portfolio: a single facility may use self-contained luminaires in accessible areas and central battery systems in atria, high-bay warehouses, and plant rooms where access is difficult, which means that suppliers offering both architectures with compatible monitoring can address the full specification.
Don't pay for what you don't need. Save 30%
Customise your report by selecting specific countries or regions
By Operating Mode • Maintained luminaires operate continuously as both normal and emergency lighting, and they are the default specification for cinemas, theatres, assembly occupancies, and any space where the emergency lighting must double as general illumination or where occupants would be plunged into darkness before the emergency circuit activates. • Non-maintained luminaires remain off during normal operation and illuminate only on power failure, and they are the standard choice for egress paths, corridors, and stairwells in commercial and residential buildings where the normal lighting is expected to be on during occupancy. • Sustained luminaires incorporate two lamps or light sources, one operating continuously and one operating only on emergency power, and they serve spaces such as hospitals and care homes where a low level of continuous illumination is required alongside the emergency function, with EN 1838’s three-hour duration requirement for sleeping accommodation reinforcing the sustained or maintained specification in those environments.
By Application • Commercial buildings represent the largest application base because offices, retail, and mixed-use developments are subject to the full weight of NFPA 101, the Regulatory Reform (Fire Safety) Order 2005, and equivalent national codes, and because the inspection-failure data indicating that 43 percent of fire marshal violations involve egress lighting is concentrated in this segment. • Industrial facilities require emergency lighting that integrates with hazardous-area classification, high-bay mounting, and process-safety systems, and the central battery versus self-contained evaluation literature is most directly applicable to industrial environments where high-mounted luminaires make maintenance access costly. Residential buildings, particularly multi-family and high-rise residential, are subject to NFPA 101 egress illumination requirements and to local building code mandates for common areas, stairwells, and corridors, and the emergence of lithium-ion battery safety concerns in residential settings is adding a new dimension to specification. • Public infrastructure, including transport hubs, tunnels, and civic buildings, represents the most technically demanding application because the egress paths are long, the occupant load is high, and the consequences of failure are most severe, and the Gulf infrastructure pipeline and the UAE Civil Defence testing recognition framework illustrate how public-sector procurement shapes specification in these environments.
By Distribution Channel • Direct sales dominate large commercial, industrial, and public infrastructure projects where the emergency lighting specification is developed alongside fire detection, alarm, and suppression systems, and where the authority having jurisdiction’s approval depends on documentation and test evidence that the manufacturer or its representative must supply. • Indirect sales through electrical wholesalers and life-safety distributors serve the replacement, battery-replacement, and small-project segments, where the buyer is often an electrical contractor or facility maintenance team responding to an inspection finding, and where the wholesaler’s ability to confirm UL 924 listing, GB 17945-2024 certification, or IS 10322:2026 compliance at the counter determines the transaction.
Regional Analysis • North America operates under the most prescriptive testing and documentation regime, with NFPA 101 requiring emergency illumination to activate within 10 seconds and sustain 1 foot-candle average initially and 0.6 foot-candles average at 90 minutes, with monthly 30-second functional tests and annual 90-minute discharge tests documented in writing for every fixture. UL 924 listing is the equipment gating standard, and the National Electrical Manufacturers Association’s LS 20028-2024 guide serves as the interpretive reference linking equipment standards to installation codes. The inspection-failure data showing 43 percent of fire marshal violations involving egress lighting and roughly 76 percent of buildings failing exit-lighting inspections indicates that enforcement intensity, rather than new construction, is the dominant demand driver in the region. • Europe applies EN 1838’s activation timing of 50 percent illuminance within 5 seconds and full illuminance within 60 seconds, with 1 lux along the escape route centre line and a one-hour nominal duration rising to three hours for sleeping accommodation including hospitals, care homes, and hotels. The Regulatory Reform (Fire Safety) Order 2005 imposes the duty on the responsible person in England and Wales to provide emergency lighting of adequate intensity where escape routes require illumination, and BS 5266-1 and BS EN 60598-2-22 provide the compliance framework for signs and luminaires. • Asia-Pacific is undergoing the most active regulatory transition, with China’s GB 17945-2024 taking effect on 1 May 2025 and prohibiting sale of non-conforming products, and India’s IS 10322 (Part 5/Section 8):2026 aligning emergency luminaire requirements with IEC 60598-2-22:2021 and extending coverage to emergency lighting chains, alongside National Building Code provisions requiring 5-second activation and 90-minute duration. • South America is shaped by national fire codes and building regulations that increasingly reference IEC 60598-2-22 and EN 1838 principles, though enforcement capacity and certification infrastructure vary across the region, and the addressable market is concentrated in commercial, industrial, and infrastructure projects where life-safety documentation is a procurement precondition. • Middle East and Africa, particularly the Gulf, combines the Saudi Building Code’s 90-minute duration and 11-lux initial average with UAE Civil Defence’s laboratory recognition framework covering EN 60598-2-22, EN 62034, and EN 50171, and the region’s inspection regimes treat emergency lighting duration as a first-inspection failure point, which makes documented battery performance and automatic test capability decisive specification criteria.
Considered in this report • Historic Year: 2020 • Base year: 2025 • Estimated year: 2026 • Forecast year: 2031
Aspects covered in this report • Global Emergency Lighting Market with its value and forecast along with its segments • Various drivers and challenges • On-going trends and developments • Top profiled companies • Strategic recommendation
By Product Type • Emergency Exit Signs • Emergency Luminaires • Emergency Bulkhead Lights • Emergency Floodlights
By Power Source • Self-Contained Battery Systems • Central Battery Systems
By Operating Mode • Maintained • Non-Maintained • Sustained
By Application • Commercial Buildings • Industrial Facilities • Residential Buildings • Public Infrastructure
By Distribution Channel • Direct Sales • Indirect Sales
Request Table of Contents
Emergency Lighting Market Research FAQs
Key driver: Code enforcement and inspection failure rates creating non-discretionary replacement demand. Key challenge: Architecture lock-in and battery maintenance burden across a fragmented installed base. Key trend: Automated test and remote monitoring shifting emergency lighting into the building management stack.
The report uses 2020 as the historic year, 2025 as the base year, 2026 as the estimated year, with forecasts up to 2031.
The Global Emergency Lighting Market is analysed by product type (Emergency Exit Signs, Emergency Luminaires, Emergency Bulkhead Lights, Emergency Floodlights); power source (Self-Contained Battery Systems, Central Battery Systems); operating mode (Maintained, Non-Maintained, Sustained); application (Commercial Buildings, Industrial Facilities, Residential Buildings, Public Infrastructure); distribution channel (Direct Sales, Indirect Sales).
The report covers Global.
This report is open for pre-booking. Pre-book it to receive the full report as soon as it is released. You can also request a free sample and the table of contents in the meantime.
Yes. Bonafide Research can add countries, segments or company profiles to match your requirements. Request customisation.
One individual can access, store, display, or archive the report in Excel format but cannot print, copy, or share it. Use is confidential and internal only. License information
One individual can access, store, display, or archive the report in PDF format but cannot print, copy, or share it. Use is confidential and internal only. License information
Up to 10 employees in one region can store, display, duplicate, and archive the report for internal use. Use is confidential and printable. License information
All employees globally can access, print, copy, and cite data externally (with attribution to Bonafide Research). License information