Mexico Dewatering Equipment Market Overview, 2031

Market Insights on Mexico Dewatering Equipment Market

• According to the research report, "Mexico Dewatering Equipment Market Outlook, 2031," published by Bonafide Research, the Mexico Dewatering Equipment Market is expected to reach a market size of more than USD 124.48 Million by 2031.
• Mexico's dewatering equipment landscape has shifted decisively over the past five years. At the close of 2024, the National Water Commission (CONAGUA) reported 2,899 wastewater treatment plants operating with an installed capacity of 194,913 liters per second and a treated flow of 143,769 liters per second, translating to a treatment coverage of 68.1 percent of municipal wastewater generation. This represents steady progress from earlier coverage levels, yet the gap between installed capacity and actual treated flow reveals that a substantial portion of the nation's treatment infrastructure operates below design parameters, creating sustained demand for sludge management and dewatering upgrades.
• Federal investment has accelerated through the Programa de Agua Potable, Drenaje y Tratamiento (PROAGUA), which formalized agreements with 29 federal entities between January and June 2025, deploying 2,010.8 million pesos for construction and expansion of water and sanitation infrastructure. A further 926 million pesos was invested through the Programa de Saneamiento de Aguas Residuales (Prosanear) for treatment plant construction. CONAGUA's 2025 investment programme encompasses 447 potable water works, 114 sewerage projects, and 25 wastewater treatment plants, alongside 1,079 biodigesters and 853 rural sanitation units.
• Regulatory pressure has intensified with the full implementation of NOM-001-SEMARNAT-2021, which replaced a standard that had remained unchanged for 25 years. The updated norm establishes stricter permissible limits for fats and oils at 15 mg/L monthly average, 18 mg/L daily average, and 21 mg/L instantaneous value. Total suspended solids, total nitrogen, and phosphorus limits were also tightened, while maximum discharge temperature for rivers was reduced from 40 degrees to 35 degrees Celsius. These parameters directly influence the selection and sizing of dewatering equipment, as facilities must achieve higher solids capture and drier cake to comply.
• The Atotonilco wastewater treatment plant, one of the largest in Latin America, serves approximately 12.6 million residents in the Mexico City valley and incorporates advanced sludge stabilization and dewatering processes. CONAGUA signed a collaboration agreement in 2024 to advance the San Antonio de los Buenos treatment plant in Tijuana, which processes 800 liters per second and employs automated sludge stabilization tools to reduce volume and ensure compliance with national standards.
• Aquatech Mexico 2025, held in Mexico City from September 2nd to 4th, convened the water and wastewater treatment industry for Latin America's most significant exhibition, featuring filter press technology demonstrations and dewatering solution showcases from international suppliers. Metso inaugurated its Dewatering Development Hub in Irapuato on April 10, 2025, representing an investment of approximately EUR 45 million. The facility manufactures polymer filter plates for both sub-assemblies and new equipment, serving the Americas market while also reaching customers in Asia-Pacific and Africa.

Competitive Landscape of Mexico Dewatering Equipment Market

• Metso's Irapuato facility, spanning over 18,000 square metres with more than 8,500 square metres dedicated to production and warehousing, manufactures polymer filter plates for its own equipment and third-party suppliers. Giuseppe Campanelli, President for North and Central America at Metso, positioned the hub as a milestone in enhancing customer service capabilities, while Tomas Hakala, Senior Vice President of Beneficiation, Dewatering and Hydrometallurgy Services, emphasized that polymer filter plates are both strategic and critical components. The hub prioritizes renewable energy sources including solar power to support Metso's net-zero CO2 emissions goal by 2030.
• Grupo Pochteca, a Mexican specialty chemicals distributor, supplies flocculants and coagulants essential for sludge conditioning ahead of mechanical dewatering. The company's network spans multiple industrial corridors, providing chemical solutions to municipal treatment plants and industrial facilities across the country.
• Rotoplas, through its water treatment division, offers decentralized wastewater treatment solutions incorporating sludge management systems. The company's presence across Mexican municipalities positions it as a key channel partner for dewatering equipment integration into packaged treatment plants.
• G&G Geomembranas y Geosintéticos, founded in 2004, provides engineering solutions incorporating geotextile dewatering systems and containment technologies for mining and municipal applications. The company's portfolio addresses the containment and dewatering requirements of tailings management facilities.
• Fraccaroli & Balzan supplied a complete wastewater treatment and slurry dewatering plant to a marble processing operation in Mexico, featuring a filter press model Atlantis FB/800-15 with a treatment capacity of 0.312 cubic metres per cycle. Shanghai Junyi Filter Equipment secured an order for a 500-cubic-metre pressure filter machine tailored for stone cutting wastewater treatment, demonstrating the presence of international suppliers in the Mexican market.
• Entry barriers remain significant due to the capital intensity of establishing local manufacturing, the need for specialized technical expertise in mechanical separation, and the regulatory complexity governed by CONAGUA, SEMARNAT, and PROFEPA. The requirement for environmental impact assessments and water concession permits under the Ley de Aguas Nacionales further reinforces incumbency advantages for established players with regulatory expertise.

Canada Market Dynamics

Driver: NOM-001-SEMARNAT-2021 Compliance and Treatment Plant Rehabilitation The comprehensive update to NOM-001-SEMARNAT-2021, ending a 25-year regulatory freeze, has created a compliance-driven procurement cycle across Mexico's municipal and industrial treatment facilities. The new limits for fats and oils at 15 mg/L monthly average and total suspended solids reductions compel operators to upgrade dewatering systems to achieve higher solids capture rates. CONAGUA's 2025 investment of 4,500 million pesos for water and sanitation projects, including 25 treatment plants, directly channels capital toward equipment upgrades that meet the revised standards.

Challenge: Infrastructure Obsolescence and Underutilized Capacity Despite a treatment coverage rate of 68.1 percent, a significant proportion of Mexico's wastewater treatment plants operate below design capacity. CONAGUA data indicates that only 57 percent of municipal wastewater is effectively treated, with 25 percent of treatment plants non-operational. The gap between installed capacity at 194,913 liters per second and actual treated flow at 143,769 liters per second reflects chronic underutilization driven by maintenance deficits, equipment failures, and operational constraints. This creates a dual challenge for dewatering equipment suppliers, as facilities require not only new installations but also comprehensive rehabilitation of existing systems.



Trend: Nearshoring-Driven Industrial Expansion and Water Reuse Mexico's emergence as a nearshoring destination for manufacturing has intensified industrial water demand, particularly in northern border states. PEMEX reported an increase in its water reuse index, with reclaimed water supply at refineries rising by 7.1 million cubic metres, primarily at the Madero and Cadereyta refineries. The state oil company targets 56.4 million cubic metres per year of water reuse for crude oil refining by 2030, requiring rehabilitation of refinery wastewater treatment plants. This industrial expansion, coupled with tightening discharge regulations, is driving adoption of high-efficiency dewatering technologies capable of handling complex industrial sludge streams.

Segment Analysis

Mexico Dewatering Equipment Market by Equipment Type
• Sludge & Slurry Dewatering Equipment dominates Mexico's market, driven by the continuous generation of wastewater from residential and commercial sources across the nation, requiring robust dewatering solutions for public health and environmental protection. CONAGUA's rehabilitation of the Atotonilco facility, serving 12.6 million residents, exemplifies the scale of municipal sludge management requirements.
• Groundwater Dewatering Equipment serves construction sites and mining operations. Mexican regulations for construction dewatering lack detailed references, and piezometric data are limited, making precise groundwater control a challenge. The CFE's construction specifications acknowledge that water presence in excavations reduces soil resistance properties and creates additional pressure on excavation faces, necessitating systematic dewatering protocols.

Mexico Dewatering Equipment Market by Technology
• Centrifuges are highly effective for processing large volumes of liquid at high speeds, making them ideal for mining and large-scale wastewater treatment plants. High-performance centrifuges with 350-500 G-force capability are specified for oil & gas sector applications in southeastern states and offshore operations, handling drilling mud and produced-water sludge.
• Filter Presses achieve the highest cake solids concentration among mechanical dewatering systems. Fraccaroli & Balzan's Atlantis FB/800-15 filter press, installed at a marble processing facility in Mexico, demonstrates the technology's application in industrial slurry dewatering with a treatment capacity of 0.312 cubic metres per cycle.
• Belt Filter Presses remain a staple in Mexican municipal applications. HUBER's Bogenpress B-PRESS offers a combi-unit configuration for thickening and dewatering in one working process, with chicanes designed to optimize performance.
• Screw Presses are gaining adoption for their compact footprint and ability to handle high-concentration, viscous sludge. The Puerto Vallarta wastewater treatment plant adopted the VOLUTE dewatering screw press mechanism, achieving lower moisture content compared to the previous system.
• Vacuum Filters represent a legacy technology with declining new installations in Mexico but a residual installed base at older industrial facilities.
• Dewatering Screens support construction and aggregate processing applications, with compliance under state-level water regulations governing construction site discharge.
• Pumps & Wellpoint Systems provide groundwater control for construction sites and mining operations. The Fresnillo underground mine implemented a Pexgol installation pumping mine water from level -695 to level -610, eliminating intermediate booster stations through a single submersible pump configuration.
• Other Technologies include deep-well systems and geotextile dewatering systems. G&G Geomembranas y Geosintéticos supplies containment and dewatering solutions for mining and municipal applications.

Mexico Dewatering Equipment Market by End-User
• Municipal Wastewater Treatment represents the largest application segment, with CONAGUA reporting 2,899 plants operating nationwide. The 2025 investment programme allocates 4,500 million pesos for construction, expansion, and rehabilitation of 25 treatment plants, alongside sewerage and potable water infrastructure.
• Industrial applications encompass stone cutting, food processing, and chemical sectors. Shanghai Junyi's 500-cubic-metre pressure filter machine order for stone cutting wastewater treatment illustrates the industrial demand for high-capacity dewatering equipment.
• Mining & Mineral Processing requires dewatering equipment for both tailings management and groundwater control. NOM-141-SEMARNAT-2003 establishes requirements for the design, construction, and operation of mine tailings dams, creating a regulatory framework that drives investment in dewatering and filtration systems.
• Construction & Infrastructure dewatering is governed by CONAGUA's infrastructure works permit process under CONAGUA-02-002, which requires hydrological studies and environmental impact authorization. The Atotonilco treatment plant's construction demonstrates the scale of infrastructure-driven demand.
• Oil & Gas operations, particularly PEMEX's refining and production facilities, require produced water treatment and crude oil dehydration. PEMEX acknowledges challenges with water and salinity in crude oil, employing chemical and decantation processes for dehydration. The company's water reuse programme targets 56.4 million cubic metres per year for refining operations by 2030.


Considered in this report
• Historic Year: 2020
• Base year: 2025
• Estimated year: 2026
• Forecast year: 2031

Aspects covered in this report
• Dewatering Equipment Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Equipment Type
• Sludge & Slurry Dewatering Equipment
• Groundwater Dewatering Equipment

By Technology
• Centrifuges
• Filter Presses
• Belt Filter Presses
• Screw Presses
• Vacuum Filters
• Dewatering Screens
• Pumps & Wellpoint Systems
• Other Technologies (Deep-Well Systems, Geotextile Dewatering Systems, Electro-Dewatering Systems and Other specialized dewatering technologies)

By End-User
• Municipal Wastewater Treatment
• Industrial
• Mining & Mineral Processing
• Construction & Infrastructure
• Oil & Gas